New products

Specials

SAUTER

Measuring equipment SAUTER

SAUTER There are 70 products.

Subcategories

  • 287/289

    Spring balances KERN 287/289

  • FA

    Mechanical force gauge SAUTER FA

    • Dual scale: shows Newton and kg
    • Rotatable display unit for an easy calibration of the instrument
    • Peak hold function by drag pointer
    • Can be mounted on all manual test stands
    • Zeroing by a short push of the switch
    • Delivered in a hard carrying case
    • Standard attachments: as shown below, extension rod: 90 mm

    Technical data

    • Precision: 1 % of [Max]
    • Dimensions W×D×H 230×60×50 mm
    • Thread: M6
    • Net weight approx. 0,65 kg
  • FK

    Digital force gauge SAUTER FK

  • FC

    Tensile force gauge SAUTER FC in compact metal housing

    • Turnable display with backlight
    • Real time or Peak Hold Mode to observe transcients or capture peaks
    • Metal housing for durable usage in harsh environmental conditions
    • Capacity display: A bar lights up to show how much of the measuring range is still available
    • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed between 10 and 100 % of [Max], in pull and push direction. The process is supported by an acoustic and visual signal
    • Safety: If loads exceed 110 % of the measuring range, the device will give clear acoustic and visual signals
    • Internal memory for up to 1000 measurements
    • USB data interfaces as standard
    • Data interface RS-232 (only for connection to the printer)
    • Selectable: AUTO-OFF function or permanent operation
    • Delivered in a hard carrying case
    • Selectable measuring units: N, kg, oz, lb
    • Standard attachments: as shown below, extension rod: 90 mm
    • Can be mounted on all SAUTER test stands (with adapter plate)

    Technical data

    • Precision: 0,3 % of [Max]
    • Internal measuring frequency: 1000 Hz
    • Overload protection: 150 % of [Max]
    • Overall dimensions W×D×H 145×73×34 mm
    • Thread: M6
    • Net weight approx. 0,94 kg
    • Permissible ambient temperature -10 °C/40 °C
  • FH

    Digital force gauge SAUTER FH

  • FL-S

    Digital force gauge SAUTER FL-S

    Premium force measuring instrument with graphic-assisted display and integrated measuring cell

    • Turnable display with backlight
    • Real time or Peak Hold Mode to observe transcients or capture peaks
    • Metal housing for durable usage in harsh environmental conditions
    • Can be mounted on all SAUTER test stands
    • Capacity display: A bar lights up to show how much of the measuring range is still available
    • Function to set limits, programming of Max./Min., in pull and push direction, with output of audible and optical signal. Ideal mode for efficient and accurate testing of standard parts - ideal mode for efficient and accurate testing of standard parts
    • Internal memory for up to 500 measurements
    • Continuous analogue output: Linear voltage signal in relation to the load (0–2 V)
    • Delivered in a hard carrying case
    • Standard attachments: as shown below (not for SAUTER FL 2K)
    • Selectable measuring units: N, kN, kgf, ozf, lbf

    Features

    • Peak hold function: capturing a peak value within a measuring process.
    • Push and Pull: the measuring device can capture tension and compression forces.
    • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
    • Data interface RS-232: To connect the balance to a printer, PC or network
    • USB data interface: To connect the balance to a printer, PC or other peripherals.
    • Analog Data Interface
    • GLP/ISO record keeping of weighing data with date, time and identification-no. Only with printers from KERN.
    • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
    • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
    • Rechargeable battery pack: rechargeable set
    • Universal mains adapter: 100-240V
    • 2 years warranty

    Measuring system

    • Overload protection (of [Max]): 120 %
    • Precision (of [Max]): 0,200 %
    • Preset unit: N
    • Test frequency: 1000 Hz
  • FL-M

    Digital force gauge SAUTER FL-M

    Premium force-measuring device with graphics display for tensile and compressive force measurement with external measuring cell

    • Premium force-measuring device external measuring cell, tension loops and pressure plates included with delivery
    • Turnable display with backlight
    • Real time or Peak Hold Mode to observe transcients or capture peaks
    • Metal housing for durable usage in harsh environmental conditions
    • Can be mounted on all SAUTER test stands
    • Capacity display: A bar lights up to show how much of the measuring range is still available
    • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
    • Internal memory for up to 500 measurements
    • Continuous analogue output: Linear voltage signal in relation to the load (-2 – +2 V)
    • Selectable measuring units: N, kN, kg, oz, lb
    • Delivered in a hard carrying case

    Features

    • Peak hold function: capturing a peak value within a measuring process.
    • Push and Pull: the measuring device can capture tension and compression forces.
    • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
    • Data interface RS-232: To connect the balance to a printer, PC or network
    • USB data interface: To connect the balance to a printer, PC or other peripherals.
    • Analog Data Interface
    • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
    • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
    • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed individually. The process is supported by an audible or visual signal, see the relevant model
    • Rechargeable battery pack: rechargeable set
    • Universal plug-in: 100-240V
  • TVL

    Manual test stand SAUTER TVL

  • TVP

    Manual test stands SAUTER TVP

  • THM

    Motorised horizontal test stand SAUTER THM

  • TVO

    Motorised vertical test stand SAUTER TVO

  • TVM

    Motorised vertical test stand SAUTER TVM

  • TVS

    Motorised vertical test stand SAUTER TVS

  • SD-M

    Spring tester SAUTER SD-M

  • AFH FAST

    Data transfer software SAUTER AFH FAST

  • AFH FD

    Data transfer software SAUTER AFH FD

  • AFI

    Data transfer software SAUTER AFI-1.0

  • DA

    Digital torquemeter SAUTER DA

  • DB

    Digital torquemeter SAUTER DB

  • LB

    Digital length measuring device SAUTER LB

  • LD

    Length measurement system SAUTER LD

  • TB

    Digital coating thickness gauge SAUTER TB

  • TC

    Digital coating thickness gauge SAUTER TC

  • TE

    Digital coating thickness gauge SAUTER TE

  • TF

    Digital coating thickness gauges SAUTER TF

  • TG

    Digital coating thickness gauges SAUTER TG

  • TB-US

    Ultrasonic thickness gauge SAUTER TB-US

  • TD-US

    Ultrasonic thickness gauge SAUTER TD-US

  • TN-US

    Ultrasonic thickness gauge SAUTER TN-US

  • TN-EE

    Ultrasonic thickness gauges SAUTER TN-EE

  • TU-US

    Ultrasonic thickness gauge SAUTER TU-US

  • HB

    Analogue Shore hardness tester SAUTER HB

  • HD

    Digital Shore hardness tester SAUTER HD

  • TI

    Manual shore test stand SAUTER TI

  • HK

    Mobile Leeb hardness tester SAUTER HK

  • HMM

    Mobile Leeb hardness tester SAUTER HMM

  • HMO

    Mobile Leeb hardness tester SAUTER HMO

  • HN-D

    Mobile Leeb hardness tester SAUTER HN-D

  • HO

    Mobile ultrasound hardness testing device SAUTER HO

  • SO

    Light measuring instrument SAUTER SO

  • SP

    Light measuring instrument SAUTER SP

  • SU

    Sound level meter SAUTER SU

  • SW

    Sound level meter SAUTER SW

  • TO-EE

    Ultrasonic thickness gauge SAUTER TO-EE

    Hand-hold thickness gauge using the echo-echo method

    • Premium thickness measuring device using ultrasonic technology: New NT measuring technology generation with automatic sensor adjustment (V-path correction for improved accuracy and more rapid display speed)
    • Dual measuring modes to determine material thickness
    • Echo-echo measurements: Determining the actual thickness of materials regardless of any existing coating, such as, for example, paint or an anti-corrosion coating on the base metal. In this way, the wall thickness of pipes, for example, can be determined in a non-destructive manner, without having to remove the coating and the measurement can be shown on the display, with the adjustment for the coating thickness already taken into account
    • Measuring materials: Metals, plastics, ceramics, composite materials, epoxy, glass and other materials
    • High-precision mode: Readout accuracy can be switched from 0.1 mm to 0.01 mm
    • Premium display with colour TFT display (320×240) with adjustable brightness
    • Large internal data memory 
    • Energy-saving operation with 2×AA batteries and an operating time of at least 100 hours, adjustable power-off time (sleep mode) and adjustable display switch-off (standby mode)
    • USB data output for easy data download from the device memory to the PC, as standard
    • Triple-calibration mode: Automatic 0-point adjustment, 1-point adjustment at a specified material thickness, 2-point precision adjustment with two specified material thicknesses
    • Triple measurement mode with standard measuring (point measurements), scan mode (for continuous measurement and display of the ACTUAL value, the MIN and MAX value of the measuring sequence) and DIFF mode with calculation of the difference between the ACTUAL measured value and a manually defined nominal thickness
    • Limit alarm function: Upper and lower limits can be programmed. The measurement process is supported by an audible and visual signal
    • Menu languages: GB, DE, FR, ES, IT
    • Date and time can be adjusted. It is possible to store the measurement values with a time stamp
    • Delivered in a hard carrying case
  • FS

    Digital force gauge SAUTER FS

    • 3,5" Touchscreen
    • Standard version with 2 or 4 measuring channels for external force sensors (subsequently expandable from 2 to 4)
    • An internal measuring cell is possible (is deactivated if an external measuring cell is plugged into slot 1)
    • Suitable for 4-wire and 6-wire sensors with strain gauges
    • Bridge supply voltage adjustable
    • Two-point or multi-point adjustment with weights or numerical adjustment possible
    • Connection of TEDS sensors (Transducer Electronic Data Sheet) possible
    • USB interface for programming, data transfer and power supply as standard
    • Optional interfaces: WLAN, Ethernet, Bluetooth, analogue current output (only possible individually)
    • Integrated SD card memory
    • Adjustable SI units kg, N, kN, Nm, kNm
    • Tolerance function
    • Storage of raw measured values for external evaluation
    • Peak hold function for recording the peak value or track function for continuous measurement display
    • Peak value measurement
    • Module for length measurement optional (then only use of 2 force sensors possible)
    • Mountable on SAUTER test benches

    Technical data

    • High resolution: up to 10000 points per measurement channel
    • Internal measuring frequency: 1000 Hz per measuring channel
    • Measurement accuracy:
      • with internal measuring cell: 0.1 % of [Max]
      • with external measuring cell: among other things from the measuring cells used
    • Overall dimensions W×D×H 71×31×180 mm
    • Overload protection: 150 % of [Max] with internal measuring cell
    • Thread on load receptor: M6 (outside)
    • Battery operation internal, standard, operating time up to 8 h without backlight,
    • Charging time approx. 8 h
    • External mains adapter, for connection to the USB-C socket, standard
    • Net weight approx. 0,4 kg

per page
Showing 1 - 36 of 70 items
Showing 1 - 36 of 70 items