KERN FKB 30K1A Bench scale with large weighing plate

261,00 €

-10%

290,00 €

Add to wishlist

Data sheet

Weighing range [Max]30 kg
Readout [d]1g
Reproducibility1g
Linearity3g
min. Piece weight [Counting]20g
Weighing plate dimensions340x240 mm
Material weighing platestainless steel
Option Verificationno
Option Calibration Certificateyes
Weighing unitsdwt g gn kg lb mo oz ozt t tl (HK) tl (Singap. Malays) tl (Tw)
Net weight6,5 kg

More info

  • PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels
  • Particularly practical: thanks to the large weighing ranges and compact dimensions, you can accurately weigh heavy loads in the most restricted of spaces. Useful for determining very small weight differences, such as, for example, gas wastage, abrasion of mechanical parts etc.
  • Freely programmable weighing unit, e.g. display direct in special units such as length of wire g/m, surface weight g/m2, or else

Note: Individual header data: the free software KERN SHM-01 can be used to print 4 header lines on the printout for printers 911-013 and YKB-01N. You can easily download the software here (unfortunately it cannot be sent out as a CD): Software full-version

FEATURES

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Recipe level A: Separate memory for the weight of the tare container and the recipe ingredients (net total).
  • Percentage determination: Displays the deviation from the reference weight (100%) in % instead of grams.
  • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
  • Vibration-free weighing: (Animal weighing program) Vibrations are filtered out so that a stable weight is obtained.
  • Suspended weighing: load support with hook on the underside of the balance.
  • Battery operation: The battery type is specified for each device.
  • Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version.
  • Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing
  • 2 years warranty

OPTIONS

  • Rechargeable battery pack: rechargeable set
  • Calibration with certificate possible. The time required for calibration is 3-4 days

ALL MODELS
Item number
Weighing
range
[Max]
kg
Readout
[d]
g
Reproducibility

g
Linearity

g
Min. piece
weight
[Counting]
g/piece
Option
Calibration
Certificate
FKB 8K0.1A
8
0,1
0,1
0,3
0,2
+
FKB 15K0.5A
15
0,5
0,5
1,5
1
+
FKB 15K1A
15
1
1
2
2
+
FKB 30K1A
30
1
1
3
2
+
FKB 65K1A
65
1
1
3
2
+

Accessories

30 other products in the same category:

Download