Digital force gauge SAUTER FL 5K

Peak hold function: capturing a peak value within a measuring process. Push and Pull: the measuring device can capture tension and compression forces. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network USB data interface: To connect the balance to a printer, PC or other peripherals. Analog Data Interface

GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Measuring with tolerance range (limit-setting function) Rechargeable battery pack: rechargeable set Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.

More details

891,00 €

-10%

990,00 €

Add to wishlist

Data sheet

Measuring capacity5000 N
Readout [d]1 N
Measuring frequency1000 Hz
Net weight550 g
Measuring unitsN, kN, kg, oz, lb

Description

Digital force gauge SAUTER FL-M

Premium force-measuring device with graphics display for tensile and compressive force measurement with external measuring cell

  • Premium force-measuring device external measuring cell, tension loops and pressure plates included with delivery
  • Turnable display with backlight
  • Real time or Peak Hold Mode to observe transcients or capture peaks
  • Metal housing for durable usage in harsh environmental conditions
  • Can be mounted on all SAUTER test stands
  • Capacity display: A bar lights up to show how much of the measuring range is still available
  • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
  • Internal memory for up to 500 measurements
  • Continuous analogue output: Linear voltage signal in relation to the load (-2 – +2 V)
  • Selectable measuring units: N, kN, kg, oz, lb
  • Delivered in a hard carrying case

Features

  • Peak hold function: capturing a peak value within a measuring process.
  • Push and Pull: the measuring device can capture tension and compression forces.
  • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • USB data interface: To connect the balance to a printer, PC or other peripherals.
  • Analog Data Interface
  • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
  • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
  • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed individually. The process is supported by an audible or visual signal, see the relevant model
  • Rechargeable battery pack: rechargeable set
  • Universal plug-in: 100-240V

Download

11 other products in the same category: