Crane scale KERN HFA 1T-4
    • Crane scale KERN HFA 1T-4
    • Crane scale KERN HFA 1T-4
    • Crane scale KERN HFA 1T-4
    • Crane scale KERN HFA 1T-4

    Crane scale KERN HFA 1T-4

    €580.00
    Tax excluded

    Compact crane scale with integrated display

    Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Battery operation: The battery type is specified for each device. Rechargeable battery pack: rechargeable set  Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 3 years warranty

    Certificate

    Volume discounts

    QuantityUnit priceYou Save
    2€580.00€58.00
    3€580.00€174.00
    5€580.00€435.00
    10€580.00€1,160.00

    Compact crane scale KERN HFA

    • With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety)
    • With its high-quality finish, low weight and compact dimensions, this crane scale is an essential device for industrial use, on building sites, in freight centres, ports etc.
    • Because of its compact design it is also ideally suited for installation in systems where space is limited, etc.
    • Ideally suited for determining weight quickly while loading and unloading
    • Peak load display (peak hold)
    • Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed
    • Tare: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed
    • Material and design of housing/load support: aluminium/stainless steel bearing

    Technical data

    • Large backlit LCD display, digit height 23 mm
    • Material and design of housing/load support: aluminium/stainless steel bearing
    • Rechargeable battery pack internal, operating time up to 30 h without backlight, charging time approx. 12 h
    • Optional battery operation, 3×1.5 V AA not included, operating time up to 40 h
    • Precision: 0,2 % of [Max]
    • Measuring frequency 60 Hz
    • Further weighing units: kg, lb, N
    • Permissible ambient temperature 5 °C/35 °C

     KERN HFA Datasheet

    HFA 1T-4

    Data sheet

    Weighing range [Max]
    1000 kg / 1 t / 2205 lb
    Readout [d]
    0,5 kg / 1,1 lb
    Weighing plate dimensions
    255 x 90 x 30 mm
    Material weighing plate
    aluminium / stainless steel bearing
    Weighing units
    kg lb N
    Net weight
    1,8 kg

    Accessories