Digital force gauge SAUTER FL 10K
    • Digital force gauge SAUTER FL 10K
    • Digital force gauge SAUTER FL 10K
    • Digital force gauge SAUTER FL 10K

    Digital force gauge SAUTER FL 10K

    1,150.00 €
    Tax excluded

    Peak hold function: capturing a peak value within a measuring process. Push and Pull: the measuring device can capture tension and compression forces. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network USB data interface: To connect the balance to a printer, PC or other peripherals. Analog Data Interface

    GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Measuring with tolerance range (limit-setting function) Rechargeable battery pack: rechargeable set Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.

    Digital force gauge SAUTER FL-M

    Premium force-measuring device with graphics display for tensile and compressive force measurement with external measuring cell

    • Premium force-measuring device external measuring cell, tension loops and pressure plates included with delivery
    • Turnable display with backlight
    • Real time or Peak Hold Mode to observe transcients or capture peaks
    • Metal housing for durable usage in harsh environmental conditions
    • Can be mounted on all SAUTER test stands
    • Capacity display: A bar lights up to show how much of the measuring range is still available
    • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
    • Internal memory for up to 500 measurements
    • Continuous analogue output: Linear voltage signal in relation to the load (-2 – +2 V)
    • Selectable measuring units: N, kN, kg, oz, lb
    • Delivered in a hard carrying case

    Features

    • Peak hold function: capturing a peak value within a measuring process.
    • Push and Pull: the measuring device can capture tension and compression forces.
    • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
    • Data interface RS-232: To connect the balance to a printer, PC or network
    • USB data interface: To connect the balance to a printer, PC or other peripherals.
    • Analog Data Interface
    • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
    • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
    • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed individually. The process is supported by an audible or visual signal, see the relevant model
    • Rechargeable battery pack: rechargeable set
    • Universal plug-in: 100-240V
    FL 10K

    Data sheet

    Measuring capacity
    10.000 N
    Readout [d]
    2 N
    Measuring frequency
    1000 Hz
    Net weight
    550 g
    Measuring units
    N, kN, kg, oz, lb