• -10%
Tensile force gauge SAUTER FC 1K
  • Tensile force gauge SAUTER FC 1K
  • Tensile force gauge SAUTER FC 1K
  • Tensile force gauge SAUTER FC 1K

Tensile force gauge SAUTER FC 1K

333.00 €Save 10%
370.00 €
Tax excluded

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Peak hold function: capturing a peak value within a measuring process. Push and Pull: the measuring device can capture tension and compression forces. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network USB data interface: To connect the balance to a printer, PC or other peripherals.

GLP/ISO record keeping of weighing data with date, time and identification-no. Only with printers from KERN. Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.  Rechargeable battery pack: rechargeable set Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version.


Tensile force gauge SAUTER FC compact in metal housing

  • Turnable display with backlight
  • Real time or Peak Hold Mode to observe transcients or capture peaks
  • Metal housing for durable usage in harsh environmental conditions
  • Capacity display: A bar lights up to show how much of the measuring range is still available
  • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed between 10 and 100 % of [Max], in pull and push direction. The process is supported by an acoustic and visual signal
  • Safety: If loads exceed 110 % of the measuring range, the device will give clear acoustic and visual signals
  • Internal memory for up to 1000 measurements
  • USB data interfaces as standard
  • Data interface RS-232 (only for connection to the printer)
  • Selectable: AUTO-OFF function or permanent operation
  • Delivered in a hard carrying case
  • Selectable measuring units: N, kg, oz, lb
  • Standard attachments: as shown below, extension rod: 90 mm
  • Can be mounted on all SAUTER test stands (with adapter plate)

Technical data

  • Precision: 0,3 % of [Max]
  • Internal measuring frequency: 1000 Hz
  • Overload protection: 150 % of [Max]
  • Overall dimensions W×D×H 145×73×34 mm
  • Thread: M6
  • Net weight approx. 0,94 kg
  • Permissible ambient temperature -10 °C/40 °C

Data sheet

Measuring capacity
1000 N
Readout [d]
1 N
Measuring frequency
1000 Hz
Net weight
940 g
Measuring units
N, kg, oz, lb