Tensile force gauge KERN HFA
    • Tensile force gauge KERN HFA
    • Tensile force gauge KERN HFA
    • Tensile force gauge KERN HFA
    • Tensile force gauge KERN HFA

    Tensile force gauge KERN HFA 5T-3

    815.00 €
    Tax excluded

    Tensile force gauge with integrated display

    Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Battery operation: The battery type is specified for each device. Rechargeable battery pack: rechargeable set  Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 3 years warranty


    Tensile force gauge KERN HFA

    • With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety)
    • With its high-quality finish, low weight and compact dimensions, this tensile force gauge is an essential device for industrial use
    • Because of its compact design it is also ideally suited for installation in systems where space is limited, etc.
    • Ideally suited for determining weight quickly while loading and unloading
    • Peak load display (peak hold)
    • Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed
    • Tare: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed
    • Material and design of housing/load support: steel / steel

    Technical data

    • Large backlit LCD display, digit height 23 mm
    • Material and design of housing/load support: steel / steel
    • Rechargeable battery pack internal, operating time up to 30 h without backlight, charging time approx. 12 h
    • Optional battery operation, 3×1.5 V AA not included, operating time up to 40 h
    • Precision: 0,2 % of [Max]
    • Measuring frequency 60 Hz
    • Further weighing units: kg, lb, N
    • Permissible ambient temperature 5 °C/35 °C

     KERN HFA Datasheet

    HFA 5T-3

    Data sheet

    Weighing range [Max]
    50 kN
    Readout [d]
    20 N
    Weighing plate dimensions
    255 x 90 x 30 mm
    Material weighing plate
    steel / steel
    Weighing units
    kg lb N
    Net weight
    4 kg