• -10%
Tensile force gauge KERN HFA
  • Tensile force gauge KERN HFA
  • Tensile force gauge KERN HFA
  • Tensile force gauge KERN HFA
  • Tensile force gauge KERN HFA

Tensile force gauge KERN HFA 3T-3

657.00 €Save 10%
730.00 €
Offer ends in:
Tax excluded

Tensile force gauge with integrated display

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Battery operation: The battery type is specified for each device. Rechargeable battery pack: rechargeable set  Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 3 years warranty

Certificate

KERN HFA compact tensile force gauge

  • With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety)
  • With its high-quality finish, low weight and compact dimensions, this tensile force gauge is an essential device for industrial use
  • Because of its compact design it is also ideally suited for installation in systems where space is limited, etc.
  • Ideally suited for determining weight quickly while loading and unloading
  • Peak load display (peak hold)
  • Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed
  • Tare: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed
  • Material and design of housing/load support: steel / steel

Technical data

  • Large backlit LCD display, digit height 23 mm
  • Material and design of housing/load support: steel / steel
  • Rechargeable battery pack internal, operating time up to 30 h without backlight, charging time approx. 12 h
  • Optional battery operation, 3×1.5 V AA not included, operating time up to 40 h
  • Precision: 0,2 % of [Max]
  • Measuring frequency 60 Hz
  • Further weighing units: kg, lb, N
  • Permissible ambient temperature 5 °C/35 °C

 KERN HFA Datasheet

HFA 3T-3

Data sheet

Weighing range [Max]
30 kN
Readout [d]
10 N
Weighing plate dimensions
255 x 90 x 30 mm
Material weighing plate
steel / steel
Weighing units
kg lb N
Net weight
2 kg

Accesories

crane-scales
Crane scale High-strength shackle till 3 t
High-strength shackle, cast steel, hot-dip galvanised and lacquered, with screw bolts Suitable for crane scales KERN HFA and KERN HFC (only for...
103.50 € Regular price 115.00 € Price
Offer ends in: