• -11%
SAUTER HMP. Mobile Leeb hardness tester
  • SAUTER HMP. Mobile Leeb hardness tester
  • SAUTER HMP. Mobile Leeb hardness tester
  • SAUTER HMP. Mobile Leeb hardness tester

SAUTER HMP. Mobile Leeb hardness tester

€1,593.10Save 11%
Tax excluded

Pure quality for professional users


  • Automatic recognition of the impact (rebound) sensor connected to the HMP.
  • Measures all metal samples (> 5 kg, thickness > 8 mm)
  • Mobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the SAUTER HMP. offers the highest level of mobility and flexibility
  • External impact sensor standard (Type D)
  • All measurement directions possible (360°) thanks to an automatic compensation function
  • Software and PC connection cable standard
  • Standard block for calibration with defnied HLD value standard
  • Support rings for bended testing samples available on request, on request
  • Delivered in a hard carrying case
  • Internal memory for up to 100 data groups, with up to 32 values per group forming the average value of the group
  • Mini statistics function: displays the measured result, the average value, the impact direction, date and time
  • Measurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)
  • Automatic unit conversion: The measuring result is automatically converted into all specified hardness units

  • Precision: ± 1 % at 800 HLD
  • Measuring range tensile strength: 374 - 2652 MPa (steel)
  • Minimum sample radius (concave/convex): 50 mm (with support ring: 10 mm)
  • Min. sample weight on a solid and stable support:
    • Sensor C: 1,5 kg
    • Sensor D, DC, D+15, DL: 5 kg
    • Sensor G: 15 kg
  • Minimum sample thickness:
    • Sensor C: 1 mm
    • Sensor D, DC, D+15, DL: 8 mm
    • Sensor G: 10 mm
Battery operation: The battery type is specified for each device.
Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version.
Calibration block: standard for adjusting or correcting the measuring device.
Data interface RS-232: To connect the balance to a printer, PC or network
PC software: to transfer the measurements from the device to a PC.
Statistics: using the saved values, the device calculates statistical data, such as average value, standard deviation etc.
2 years warranty
Printer: a printer can be connected to the device to print out the measurements.
ISO calibration possible. The time required for ISO calibration is specified in the pictogram.