• -10%
Counting scale KERN CXB 30K10NM approved
  • Counting scale KERN CXB 30K10NM approved
  • Approved Counting scale KERN CXB 30K10NM

Counting scale KERN CXB 30K10NM

342.00 €Save 10%
380.00 €
Tax excluded

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Piece counting: Reference quantities selectable. Display can be switched from piece to weight.  Rechargeable battery pack: rechargeable set Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 2 years warranty Approved to Class III for commercial use.

Certificate

Counting scale KERN CXB 30K10NM

  • Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value
  • Programmable using numerical key pad:
    1. required reference quantity
    2. known reference weight
  • Three displays for
    1. Total weight (verifiable)
    2. Piece weight
    3. Total count
  • Audible Fill-to-target: target quantity or target weight can be programmed. When the target value is reached, a signal will sound
  • Counting results memory: adds up all individual piece counts, result is shown in total weight and total pieces
  • Energy management: Backlight turns off after 5 sec
  • Two balances in one: Changes from counting mode to weighing mode at the touch of a key
  • PRE-TARE function for manual subtraction of a known container weight, value can be saved
  • Weighing plate dimensions, stainless steel, WxD 300x225 mm
CXB 30K10NM

Data sheet

Weighing range [Max]
30 kg
Readout [d]
10 g
min. Piece weight [Counting]
10 g
Weighing plate dimensions
300 x 225 mm
Material weighing plate
stainless steel
Weighing units
g kg
Net weight
4 kg

Accesories