Sound level meter SAUTER SW
    • Sound level meter SAUTER SW
    • Sound level meter SAUTER SW
    • Sound level meter SAUTER SW
    • Sound level meter SAUTER SW
    • Sound level meter SAUTER SW

    Sound level meter SAUTER SW 2000

    990.00 €
    Tax excluded

    First-class professional Class II sound level meter

    • Ideal for measurements for workplaces which are outdoors, e.g. at airports, on building sites, in road construction etc. with broad access to spectrum thanks to the highly-accurate 24-Bit A/D converter
    • Floating point evaluation for higher level of accuracy and better stability
    • The optimised analogue frontend switch reduces the ambient noise and increases the linear measuring range
    • A specially-developed algorithm permits a compliant dynamic range of more than 120 dB! (SW 1000: > 123 dB; SW 2000: > 122 dB)
    • Three profiles and 14 user-defined measurements can be calculated in parallel with different frequency and time weighting
    • Different sound pressure levels can be selected, such as, for example, Laeq, LcPeak, LaF, LaFMax, LaFMin, SD, SEL, E
    • LN statistics and display of the graph showing the progression of time
    • User-defined integral interval measurement up to a maximum of 24 hours is possible
    • Frequency weighting (filter) A, B, C, Z
    • Time interval during measurement: F (fast), S (slow), I (pulse)
    • Freely-definable limits for the output of an optical alarm signal
    • Peak Hold Mode to capture peaks
    • Octavo function for targeted sound analysis
    • TRACK function with graphic display of a measurement

    Technical data

    • Applicable standards:
      • IEC61672-1:2013
      • GB/T3785.1–2010
      • IEC 60651:1979
      • IEC 60804:2000
      • 1/1 Octavo in accordance with IEC 61260:2014
    • ½ inch microphone
    • Permissible ambient temperature -10 °C/50 °C
    • Output (direct or alternating current)
    • AC (max 5 VRMS), DC (10 mV/DB)
    • Mains operation as standard
    • Optional battery operation, 4× 1.5V AA, not included, operating time up to 10 h
    • Dimensions W×D×H 80×36×300 mm
    • Net weight approx. 400 g


    Peak hold function: capturing a peak value within a measuring process. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network USB data interface: To connect the balance to a printer, PC or other peripherals. Analog Data Interface Statistics: using the saved values, the device calculates statistical data, such as average value, standard deviation etc. Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning. Battery operation: The battery type is specified for each device. Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA. 2 years warranty


    PC software: to transfer the measurements from the device to a PC. ISO calibration possible. The time required for ISO calibration is specified in the pictogram.

    Item number
    Accuracy class
    Frequency range
    SW 1000
    0,003–20 kHz
    50 m V/Pa
    SW 2000
    0,02–12,5 kHz
    40 m V/Pa
    SW 2000