KERN DAB 100-3 Moisture analyser
    • KERN DAB 100-3 Moisture analyser
    • KERN DAB 100-3 Moisture analyser
    • KERN DAB 100-3 Moisture analyser
    • KERN DAB 100-3 Moisture analyser
    • KERN DAB 100-3 Moisture analyser

    KERN DAB 100-3 Moisture analyser

    €1,050.00
    Tax excluded

    Moisture analyser with user-friendly graphics display and 15 memories for drying programs

    Certificate

    Volume discounts

    QuantityUnit priceYou Save
    2€1,050.00€105.00
    3€1,050.00€315.00
    5€1,050.00€787.50
    10€1,050.00€2,100.00

    KERN DAB 100-3 Moisture analyser with user-friendly graphics display and 15 memories for drying programs

    • Backlit LCD display, digit height 14 mm
      • Drying process active
      • Active heating profile
      • Active switch-off criteria
      • Previous drying time
      • Current temperature
      • Unit of the shown result, e.g. moisture [%]
      • Interim result in moisture-%
    • Halogen quartz glass heater 400 W
    • Observation window above the sample, useful during initial setting
    • Internal memory for automatic sequence of 15 complete drying processesand 5 drying processes carried out
    • The last value measured remains on the display until it is replaced by a new measurement
    • 50 sample plates included
    • Application handbook: On the internet, you will find a practical application handbook containing many examples, field reports, settings and tips for each KERN moisture analyser
    FEATURES
    • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
    • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
    • Data interface RS-232: To connect the balance to a printer, PC or network
    • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
    • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
    • Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.
    • Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 
    • 3 years warranty
    OPTIONS
    • Calibration certificate possible. The time required for calibration is 3-4 days
    Technical data:
    • Level indicator
    • Material weighing plate: Aluminium dish
    • Overall dimensions mounted (WxDxH): 240 mm x 365 mm x 180 mm
    • Revolving screw feet
    • Weighing surface (d): 92 mm
    • Gross weight: 6,100 kg
    • Net weight: 4,820 kg
    Display
    • Display digit height: 14 mm
    • Display digit height: 6 mm
    Power supply
    • Input voltage: 230 V AC 50 Hz
    Measuring system
    • External calibration
    • Linearity: 3 mg
    • Measuring range [Max]: 199 °C
    • Readout [d]: 1 mg
    • Reproducibility: 1 mg
    • Resolution: 110000
    • Stabilisation time: 3 s
    • Tare range: 110 g
    • Warm up time: 2 h
    • Weighing range [Max]: 110 g
    • Weighing system: Strain gauge
    • Weighing units: % Feuchte % Trockenmasse g
    Environmental conditions
    • Maximum humidity: 80 %
    • Maximum operating temperature: 40 °C
    • Minimum ambient temperature: 5 °C
    • Minimum humidity: 5 %
    DAB 100-3

    Data sheet

    Weighing range [Max]
    110 g
    Readout [d]
    1 mg / 0,010 %
    Reproducibility
    1 mg / 0,010 %
    Weighing plate dimensions
    Ø 92 mm
    Net weight
    4,9 kg

    Accessories