Density determination made easy![/] Thanks to the self-explanatory, graphic-assisted control panel, the density of solids and liquids can be determined in seconds, making them ideal for use in schools and universitiesVisualised process avoids operating errors
- No learning time = reduces costs
- Ideal for untrained users
The 4 steps are carried out from left to right:
Tare the balance by pressing the [TARE] key
Select density determination mode (solids/liquids)
Weighing of samples/ plummets in air
Weighing of samples/ plummets in liquid. The density will be shown on the display right away
Particularly flat design
Hook for underfloor weighing standard
Ready for use: battery 9 V Block standard. AUTO-OFF function to preserve the batteries, can be switched off
Balance and appropriate set for density determination should be ordered at the same time, see accessories
Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
Data interface RS-232: To connect the balance to a printer, PC or network
Suspended weighing: load support with hook on the underside of the balance.
Battery operation: The battery type is specified for each device.
Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version.
Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing