• -10%
SAUTER FL-TM Display device for force measuring
  • SAUTER FL-TM Display device for force measuring

SAUTER FL-TM Display device for force measuring

477.00 €Save 10%
530.00 €
Tax excluded

This offer is only an evaluation device. You can combine the FL-TM with any measuring cell from the SAUTER product range.

Steps:

  • 1. choose the FL-TM device
  • 2. Order with the option "measuring plug mounting on the measuring cell"
  • 3. Select the appropriate measuring cell
  • 4. Order the device, measuring cell and assembly: You will receive a complete set

Peak hold function: capturing a peak value within a measuring process. Push and Pull: the measuring device can capture tension and compression forces. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network USB data interface: To connect the balance to a printer, PC or other peripherals. Analog Data Interface.GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Measuring with tolerance range (limit-setting function) Rechargeable battery pack: rechargeable set Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.

Assembly of measuring cell connector
Quantity
In Stock
equalizer Compare cached
favorite_border Wishlist cached

SAUTER FL-TM Digital force gauge

  • Premium force-measuring device external measuring cell (measuring cell, tension loops and pressure plates not included with delivery)
  • Adjustable nominal loads: 5 N, 10 N, 25 N, 50 N, 100 N, 250 N, 500 N, 1 kN, 2.5 kN, 5 kN, 10 kN, 20 kN, 50 kN
  • Maximum resolution 2500 d
  • Turnable display with backlight
  • Real time or Peak Hold Mode to observe transcients or capture peaks
  • Metal housing for durable usage in harsh environmental conditions
  • Capacity display: A bar lights up to show how much of the measuring range is still available
  • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
  • Internal memory for up to 500 measurements
  • Continuous analogue output: Linear voltage signal in relation to the load (-2 – +2 V)
  • Selectable measuring units: N, kN, kg, oz, lb
FL-TM