- -10%
SAUTER DB 1-4 digital torquemeter 1 Nm
1,593.00 €Save 10%
1,770.00 €
Tax excluded
| Measuring range torque | 0,25 Nm – 5 Nm |
| Readability torque [d] (Nm) | 0,001 Nm |
| Tolerance (% of [Max]) | 0,5% |
| Units | Nm, kgf/cm, kgf/m, in/lbs, ft/lbs |
| Supported torque pickups | 20 mm, 3/8 " |
| Overload protection (% of [Max]) | 120% |
| Memory function | |
| Internal data memory: Number of individual values | 500 |
| Peak function | |
| Limit-setting function | |
| Internal measuring frequency | 1000 Hz |
| Supplied power supply | Accu & Power supply |
| Battery / accumulator type | NiMH |
| Rechargeable battery operating time - backlight off | 18 h |
| Auto-off interval(s) in battery mode/rechargeable battery mode | 1 - 60 min |
| Interfaces | RS-232 standard, USB-Device |
| Display type | LCD graphic |
| Display resolution | 128×64 |
| Material housing | metal, lacquered |
| Dimension (W×D×H) | 200×100×50 mm |
Particularly suitable for testing torque wrenches, electric hand screwdrivers and cordless screwdrivers
Torque pick-up system for dynamic testing of electric screwdrivers
Metal housing for durable use in harsh environmental conditions
Capacity display: A bar lights up to show how much of the measuring range is still available
LCD graphics display with backlight
Rubber feet with anti-slip feature
Data interface USB and RS-232 included
Internal data memory saves up to 500 measurements. The memory contents can be transferred to the PC using optional software
Peak-Hold function to capture the peak value or Track function for continuous display of measurement
Can be used in both directions of rotation
Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed individually. The process is supported by an audible and visual signal
AUTO-OFF function
Scope of delivery: Torque pick-up, sturdy carry case
DB 1-4
| Measuring range torque | 0,25 Nm – 5 Nm |
| Readability torque [d] (Nm) | 0,001 Nm |
| Tolerance (% of [Max]) | 0,5% |
| Units | Nm, kgf/cm, kgf/m, in/lbs, ft/lbs |
| Supported torque pickups | 20 mm, 3/8 " |
| Overload protection (% of [Max]) | 120% |
| Memory function | |
| Internal data memory: Number of individual values | 500 |
| Peak function | |
| Limit-setting function | |
| Internal measuring frequency | 1000 Hz |
| Supplied power supply | Accu & Power supply |
| Battery / accumulator type | NiMH |
| Rechargeable battery operating time - backlight off | 18 h |
| Auto-off interval(s) in battery mode/rechargeable battery mode | 1 - 60 min |
| Interfaces | RS-232 standard, USB-Device |
| Display type | LCD graphic |
| Display resolution | 128×64 |
| Material housing | metal, lacquered |
| Dimension (W×D×H) | 200×100×50 mm |