Ultrasonic thickness gauge SAUTER TU 300-0.01US
    • Ultrasonic thickness gauge SAUTER TU 300-0.01US
    • Ultrasonic thickness gauge SAUTER TU 300-0.01US
    • Ultrasonic thickness gauge SAUTER TU 300-0.01US
    • Ultrasonic thickness gauge SAUTER TU 300-0.01US
    • Ultrasonic thickness gauge SAUTER TU 300-0.01US

    Ultrasonic thickness gauge SAUTER TU 300-0.01US

    €1,260.00
    Tax excluded

    Calibration block: standard for adjusting or correcting the measuring device. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning. Resets the display to zero Battery operation: The battery type is specified for each device. 2 years warranty

    Certificate

    Volume discounts

    QuantityUnit priceYou Save
    2€1,260.00€126.00
    3€1,260.00€378.00
    5€1,260.00€945.00
    10€1,260.00€2,520.00
    • External sensor for difficult-to-access measurements
    • Base plate for adjustment included
    • Data interface RS-232
    • Delivered in a hard carrying case
    • Scan mode (10 measurements per sec.) or single point measuring mode possible
    • Internal memory for up to 20 files (with up to 100 values per file)
    • Function to set limits, programming of Max./Min., in pull and push direction, with output of audible and optical signal. Ideal mode for efficient and accurate testing of standard parts
    • Selectable measuring units: mm, inch

    Ultrasonic thickness gauge SAUTER TU 300-0.01US

    • Calibration block: standard for adjusting or correcting the measuring device.
    • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
    • Data interface RS-232: To connect the balance to a printer, PC or network
    • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
    • Zero setting
    • Battery operation: The battery type is specified for each device.
    • 2 years warranty

    Options/Accessories

    • Software, interface cable included, SAUTER ATU-04
    • External sensor, 2,5 MHz, Ø 14 mm, for thick samples, in particular cast iron with rough upper surfaces: Measuring range 3 – 300 mm (steel), SAUTER ATU-US01
    • External sensor, 7 MHz, Ø 6 mm, for thin test materials: Measuring range 0,75 – 80 mm (steel), SAUTER ATU-US02
    • External sensor, 5 MHz, Ø 12 mm, for hot test materials: Measuring range (steel) 3 – 200 mm at temperatures of up to 300 °C, SAUTER ATB-US02
    • External sensor, 5 MHz, Ø 10 mm, SAUTER ATU-US09
    • External sensor, 5 MHz, Ø 10 mm, transducer at an angle of 90°, SAUTER ATU-US10
    • External sensor, 6 MHz, Ø 6 mm, for thin test materials: Measuring range 

    TU 300-0.01US.

    Data sheet

    Measuring capacity
    3–200 | 300 mm
    Readout [d]
    0,01 | 0,1 mm
    Measuring head
    2,5 MHz | ∅ 14 mm
    Measuring frequency
    1000–9999 m/sec
    Net weight
    345 g
    Measuring units
    mm inch

    Accessories