• -10%
  • New
Ultrasound hardness testing device SAUTER HO-M
  • Ultrasound hardness testing device SAUTER HO-M
  • Ultrasound hardness testing device SAUTER HO-M
  • Ultrasound hardness testing device SAUTER HO-M
  • Transport case for SAUTER HO 3M

Premium UCI hardness testing device SAUTER HO 8M

€8,300.00
€7,470.00 Save 10%
Tax excluded

Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc. USB data interface: To connect the balance to a printer, PC or other peripherals. PC software: to transfer the measurements from the device to a PC. Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning. Rechargeable battery pack: rechargeable set Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.

Certificate
Quantity
In Stock

Ultrasound hardness testing device SAUTER HO-M

  • This range has identical product features to the SAUTER HO range, but is fitted with a motorised probe for automated measurement processes instead of the manual probe
  • The motorised probe has a magnetic attachment ring which fixes it onto a magnetic test item securely. For non-magnetic test items, the motorised probe can be easily fixed by hand using the ergonomically-shaped attachment ring
  • A motor inside the probe independently takes on the process of pressing the indenter into the test item, which helps to minimise incorrect use by the operator
  • One-button function: the measurement process can be started with a single press of a button. Because it is particularly easy to operate, the user can carry out the most demanding hardness tests without a lengthy teach-in phase
  • Virtually non-destructive testing: the resulting penetrations can only be seen under a microscope
  • Short duration of measurement: only 2 seconds
  • Higher accuracy and repeatability than with manual probes
  • Particularly suitable for small, thin parts thanks to the automated testing procedure
  • Designed for parts with hardened surfaces because of the low penetration depth of the indenter

Technical specifications:

  • Hardness scale: HV 0.8
  • Test force: 0.8 N
  • Attachment ring: ∅ 46 mm
  • Sensor length: 198 mm
  • Min. weight of test item: 300 g
  • Min. thickness of test item: 2 mm

Scope of supply:

  • 1 display device
  • 1 motorised sensor
  • 1 transport case
  • 1 connection cable sensor/display device
  • 1 USB cable
  • 1 hardness comparison plate
  • 1 power supply (EU)
  • 1 Allen key, software to transfer the saved data to a PC
HO 8M

Download

SAUTER HO-M Datasheet

Download (285.45k)

Accessories