Sound level meter SAUTER SW 1000

SW 1000

First-class professional Class I sound level meter

More details

1 575,00 €

-10%

1 750,00 €

Add to wishlist

More info

  • Ideal for measurements for workplaces which are outdoors, e.g. at airports, on building sites, in road construction etc. with broad access to spectrum thanks to the highly-accurate 24-Bit A/D converter
  • Floating point evaluation for higher level of accuracy and better stability
  • The optimised analogue frontend switch reduces the ambient noise and increases the linear measuring range
  • A specially-developed algorithm permits a compliant dynamic range of more than 120 dB! (SW 1000: > 123 dB; SW 2000: > 122 dB)
  • Three profiles and 14 user-defined measurements can be calculated in parallel with different frequency and time weighting
  • Different sound pressure levels can be selected, such as, for example, Laeq, LcPeak, LaF, LaFMax, LaFMin, SD, SEL, E
  • LN statistics and display of the graph showing the progression of time
  • User-defined integral interval measurement up to a maximum of 24 hours is possible
  • Frequency weighting (filter) A, B, C, Z
  • Time interval during measurement: F (fast), S (slow), I (pulse)
  • Freely-definable limits for the output of an optical alarm signal
  • Peak Hold Mode to capture peaks
  • Octavo function for targeted sound analysis
  • TRACK function with graphic display of a measurement

Technical data

  • Applicable standards:
    • IEC61672-1:2013
    • GB/T3785.1–2010
    • IEC 60651:1979
    • IEC 60804:2000
    • 1/1 Octavo in accordance with IEC 61260:2014
  • ½ inch microphone
  • Permissible ambient temperature -10 °C/50 °C
  • Output (direct or alternating current)
  • AC (max 5 VRMS), DC (10 mV/DB)
  • Mains operation as standard
  • Optional battery operation, 4× 1.5V AA, not included, operating time up to 10 h
  • Dimensions W×D×H 80×36×300 mm
  • Net weight approx. 400 g

SERIE

Peak hold function: capturing a peak value within a measuring process. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network USB data interface: To connect the balance to a printer, PC or other peripherals. Analog Data Interface Statistics: using the saved values, the device calculates statistical data, such as average value, standard deviation etc. Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning. Battery operation: The battery type is specified for each device. Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA. 2 years warranty

OPTION

PC software: to transfer the measurements from the device to a PC. ISO calibration possible. The time required for ISO calibration is specified in the pictogram.

Item number
Accuracy class
Frequency range
dB
Sensitivity
V/Pa
SW 1000
1
0,003–20 kHz
50 m V/Pa
SW 2000
2
0,02–12,5 kHz
40 m V/Pa

30 other products in the same category:

Download