KERN MLS 50-3D Moisture analyzer

Infrared moisture analyzer with graphics display and a vast database

More details

Add to wishlist

Data sheet

Weighing range [Max]50g
Readout [d]1 mg
Reproducibility1 mg
Option Calibration Certificate+
Weighing units% ATRO % Moisture % rH % Drymass g

More info

  • Backlit graphic display, digit height 14mm, digit height 14 mm
  1. Display during the drying process:
  2. Unit of the shown result, e.g. moisture [%]
  3. Interim result in moisture-%
  4. Drying process active
  5. Active result display
  6. Active heating profile
  7. Active switch-off criteria
  8. Stability display
  9. Previous drying time
  10. Current temperature
  11. Drying process active
  12. Display after the drying process
  13. End result in moisture-%
  14. Active result display
  15. Drying process has finished

Infrared heater 400 W Observation window above the sample, useful during initial setting Balance contains memory for automatic sequence of 100 complete drying programs (92 drying programs with optimised drying characteristics for rapid sample warming and therefore shorter drying times, pre-installed at the factory), 100 users with related authorisations, 1000 drying processes performed and 1000 weighing results (alibi memory) The last value measured remains on the display until it is replaced by a new measurement 10 sample plates included Application handbook: There are many practical examples in the user manual


  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • GLP/ISO log: the balance displays the weight, date and time, regardless of printer connected
  • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
  • Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.
  • Electromagnetic force compensation: A counterforce is created by means of a coil in a permanent magnet. This counterforce is the same as the load of the weight being measured on the scale a
  • 3 years warranty


  • Calibration certificate possible. The time required for calibration is 3-4 days


16 other products in the same category: