• -10%
testo 510 - Digital manometer
  • testo 510 - Digital manometer
  • testo 510 - Digital manometer
  • testo 510 - Digital manometer
  • testo 510 - Digital manometer

testo 510 - Digital manometer

€139.00
€125.10 Save 10%
Tax excluded

With the testo 510, performing system tests has never been easier using our single, easy to use, rugged, compact digital manometer. Its small form factor, bright backlit display, as well as magnetic backing will enable the 510 to be used in a wide variety of applications.

Quantity
In Stock

  • Temperature and air density compensation for accurate airflow measurements
  • Measures differential pressure to 40 in H2O
  • Backlit display ensure easy readability in low light situations
  • Temperature compensated pressure sensor

The testo 510 digital manomenter is an all in one, low pressure measurement solution.  The 510 can measure total external static pressure, differential pressure, duct velocities, manifold pressures, and air flow with pitot tube (optional).

  • 0-40 in H20 pressure measurement range
  • Temperature compensated pressure sensor
  • Magnetic backing for hands free use
  • Air flow measurement with optional pitot tube
  • User adjustable air density compensation
  • Protective cap for safe storage

Included:

testo 510, belt pouch, 2 hoses, wrist strap, certificate of conformity

Differential Pressure

  • Measuring range: 0 to 40 InH₂O / 0 to 100 hPa
  • Accuracy
    • ±0.01 InH₂O (0 to 0.12 InH₂O) / ±0.03 hPa (0 to 0.30 hPa)
    • ±0.02 InH₂O (0.12 to 0.40 InH₂O) / ±0.05 hPa (0.31 to 1.00 hPa)
    • ±(0.0 InH₂O + 1.5 % of mv) (0.40 to 40 InH₂O) / ±(0.1 hPa + 1.5 % of mv) (1.01 to 100 hPa)
  • Resolution: 0.00 InH₂O / 0.01 hPa

General technical data

  • Protection class: IP40
  • Warranty: 2 years
  • Seceltable units: hPa, mbar, Pa, mmH2O, inH₂O, inHg, mmHg, psi, m/s, fpm
  • Maximal static pressure: 7.3 psi / 500 mbar
  • Measuring rate: 0.5 sec
  • Battery type: 2 AAA batteries
  • Battery life: 50 h (average, without display illumination)
  • Storage temperature: -40.0° to 158.0 °F / -40 to +70 °C
  • Weight: 3 oz. (with batteries and protective cap) / 90 g (with batteries and protective cap)
  • Dimensions: 5 x 2 x 1 in. / 119 x 46 x 25 mm
  • Operating temperature: 32.0° to 122.0 °F / 0 to +50 °C

Differential pressure measurement on filters

Air conditioning systems are equipped with filters which prevent dirt from the outside air entering the indoor air. These filters are to be inspected regularly to make sure they are still fully functional. To do this, the pressure is measured in front of and behind the filter. The result is the differential pressure. If it is too high, the filter is contaminated and needs changing.

The testo 510 measures differential pressures in a range of 0 - 100 hPa. The differential pressure measurement is temperature-compensated for exact readings. The readings can be displayed in pascal over the entire measuring range. Magnets on the rear of the instrument allow hands-free work.

Measurement in ventilation ducts

Observance of air flows in the ventilation duct is of utmost importance for the function of the ventilation and air conditioning system. If the air flows are smaller than intended, the removal of room loads (heating, cooling and substance loads) may not be ensured in certain circumstances.

Therefore, the most accurate recording of air flows as possible is particularly important.

In conjunction with a pitot tube, testo 510 measures the air velocity in the range of 10 to 100 m/s. Magnets on the rear of the instrument allow hands-free work.

0563 0510S

Download

Instruction manual testo 510

Download (793.89k)