Accessories
Accessories
Subcategories
-
Height rods
Height rods
-
Interface cables
Interface cables
-
Protective working covers
Protective working covers
-
Ramps
Ramps
-
Batteries and battery...
Batteries and rechargeable battery packs
-
Stands
Stands
-
Software
Data transfer software
for Professional and highly flexible recording or transmission of measured values
in particular also to Microsoft® Excel or Access
-
Length measuring
Length measuring devices
-
Hardness testers
Hardness testers
-
Printers
Printers
-
Platforms
Platforms
-
Transport cases
Transport cases for storing and transporting accessories, clamps, sensors, etc.
-
Display devices
Display devices
-
Mains adapters
Mains adapters
-
Various
Various
-
Sensors
External sensor for SAUTER Ultrasonic thickness gauge and coating thickness gauge
System case (systainer® T-LOC) for storing and transporting accessories, clamps, sensors, etc.
Ethernet adapter to connect force-measuring instruments to an IP-based Ethernet network
- Protective working cover over keyboard and housing
- Suitable for precision balances KERN 572, KERN 573, KERN PKP and KERN PKT
- Similar to illustration
- scope of delivery: 5 items
Glass draught shield for KERN 572, PKP and PKT
Large glass draught shield with 3 sliding doors for easy access to the items being weighed for Precision balances KERN572, KERN PKP and KERN PKT (only for models with weighing plate size Ø 106 mm)
Plug-in power supply type | Power adapter |
Input voltage power supply / power [Max] | 100 V - 230 V |
Input voltage device / power [Max] | 12 V, 300 mA |
Adapter | EU, GB. USA |
Door tester: Handle (length: 300 mm) and two round force receptor plates (∅ 85 mm) as an option to FH 1K up to FH 5K for the safe testing of clamping forces (not approved to DIN 18650 or similar), up to 5 kN
Accessories only (without device and cell)
Protective working cover over keyboard and housing
Scope of delivery: 5 pieces
Suitable for precision balance KERN EW-N/EG-N (only for models with weighing plate size Ø 118 mm)
Rechargeable battery pack internal for Precision balance KERN EW-N/EG-N (only for models with weighing plate size Ø 118 mm and BxT 170x142 mm)
This item can only be ordered with the scale, it is installed at the factory
- Rechargeable battery pack internal
- Suitable for Precision balance KERN EW-N/EG-N (for models with weighing plate size BxT 180x160 mm)
- This item can only be ordered with the scale, it is installed at the factory
Large glass draught shield with 3 sliding doors for easy access to the items being weighed
Weighing space W×D×H 150×140×130 mm
for Precision balance KERN EW-N/EG-N (only for models with weighing plate size Ø 118 mm)
- Loop for underfloor weighing
- Suitable for KERN EG/EW (for models with weighing plate size BxT 180x160 mm)
Suitable for precision balance KERN EWJ
Scope of delivery: 5 pieces
Input voltage: 100-240V ~ 50/60Hz 0.5A
Output voltage: Output: 9V ⎓ 0.3A
Suitable for KERN scales: ECB, ECE, EW-N_EG-N, EMB, EMS, EOE, FCB, FKB-A and PCB
Mains plug with the following adapter: AU | EU | UK | US
- Wall mount for display device
- Dimensions (W×D×H): 200x100x40mm
- for scales NIB, BIC, BID, EOC, IOC, UIB, UID, EOB, EOE, EOS
KERN 474-926 Interface cable RS-232 to connect an external device
cable length approx. 1,5 m
suitable for the series KERN EW-N/EG-N and KERN PES/PEJ (Printer o.e.)
Note: The interface cable is free of charge if you purchase the balance and printer together!
- Data interface RS-232
- Suitable for Analytical balance KERN ACS/ACJ, KERN ABS-N/ABJ-NM
5 x KERN ACS-A02 Protective working cover for KERN ABS-N and ABJ-NM