Testeur de béton SAUTER FC 1K-BT

Instrument compact de contrôle de la consistance du béton projeté

• Checking the consistency of sprayed concrete is essential to ensure the maximum strength of the concrete during the curing process
• The FC 1K-BT determines exactly the forces required for the needle to penetrate the concrete. This allows reliable conclusions to be made regarding the compressive strength of the concrete during the dry phase
• Real time or Peak Hold Mode to observe transcients or capture peaks
• Metal housing for durable usage in harsh environmental conditions
• Capacity display: A bar lights up to show how much of the measuring range is still available
• Limit value function, programming of Max./ Min., with output of acoustic and optical signal
• Safety: If loads exceed 110 % of the measuring range, the device will give clear acoustic and visual signals
• Delivered in a hard carrying case
• Turnable display with backlight
• Selectable: AUTO-OFF function or permanent operation. Chargestatus indicator visualised through LED

Features SAUTER FC-BT

• Adjusting program (CAL): For quick setting of the device accuracy
• Peak hold function: capturing a peak value within a measuring process.
• Push and Pull: the measuring device can capture tension and compression forces.
• Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc.
• Data interface RS-232: To connect the balance to a printer, PC or network
• USB data interface: To connect the balance to a printer, PC or other peripherals.
• GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
• Measuring units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
• Measuring with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
• Measuring with tolerance range (limit-setting function)
• Rechargeable battery pack: rechargeable set
• Mains part: 100-230V/50-60Hz Standard type EU, GB, AU, US possible

Technical data SAUTER FC-BT

Transmission rate to PC: up to 200 measured values/second

Accuracy: 0,3 % of Max

Overload protection up to 150 % of Max

Overall dimensions W×D×H 145×73×34 mm

Net weight approx. 1670 g

Selectable measuring units: N, kgf, ozf, lbf

Robust, cleanable and portable construction

•  - Built-in 1000 N force measuring cell
•  - Rapid and simple changing of the penetration needle
•  - Inverted display for better readability
•  - Live peak force value for immediate monitoring
•  - Measurement precision ± 0,1 %
•  - Memory for up to 500 measurements
•  - USB interface

Penetration needle and adapter

•  - Removable if necessary
•  - Needle diameter: 3 mm
•  - Upper angle: 60 degrees
•  - Length: 15 mm
•  - Included: 15 needles

Accessories

Needle for concrete tester, SAUTER BT-A01