SAUTER FS Premium force gauge

with integrated measuring cell (optional) and connection possibility for up to 4 external measuring cells

Use with integrated measuring cell

The SAUTER FS premium force gauge has an integrated measuring cell for tensile and compressive force applications. Whether mobile for rapid testing or stationary integrated into a test stand or production line, the multifunction display allows all the values recorded to be read off at a glance in real time. Via the integrated interface, the data can be sent to a PC or laptop for further processing.

Use with external measuring cells

The SAUTER FS premium force gauge is compatible with all SAUTER strain gauge measuring cells. Up to 4 external measuring cells can be connected simultaneously. If all available external measuring channels are used, the internal measuring cell is deactivated as long as an external measuring cell is connected.

• 3.5" touch screen
• Standard version with 2 or 4 measuring channels for external force sensors (subsequently expandable from 2 to 4)
• An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
• Suitable for 4-wire and 6-wire sensors with strain gauges
• Two-point adjustment with weights or numerical adjustment is possible
• The specific data of an external sensor are stored directly in the connector
• USB interface for programming, data transfer and power supply
• Integrated SD card memory
• Adjustable SI units: kg, N, kN, Nm, kNm
• Tolerance function
• TRACK function for continuous display of the measurement
• Peak value measurement
• Mountable on SAUTER test benches
• Simultaneous measurement on up to four channels. External sensors with sensor data memory, optionally available
• Compact force-measuring device with internal measuring cell (up to max. 500 N) for rapid, mobile force measurement
• Delivery in high-quality and robust system case (systainer® T-LOC) including plug-in power supply and USB cable type C
• Measurement of forces in different tensile or compressive directions possible with only one measuring device

Features SAUTER FS

• Peak hold function: capturing a peak value within a measuring process.
• Scan mode: continuous capture and display of measurements.
• Push and Pull: the measuring device can capture tension and compression forces.
• Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc.
• USB data interface: To connect the balance to a printer, PC or other peripherals.
• KERN Communication Protocol (KCP)
• Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
• ZERO: Resets the display to “0”
• Rechargeable battery pack: rechargeable set

Can be mounted on all SAUTER test benches and the manual test bench  SAUTER TVL-XS

Simultaneous measurement on up to four channels. External sensors with sensor data memory optionally available

Compact force gauge with internal measuring cell (up to max. 500 N) for fast and mobile force measurements. Illustration shows optional accessories SAUTER AE 500 screw tension clamp

Measurement of forces in different tensile or compressive directions possible with only one measuring device

Technical data SAUTER FS

• High resolution: up to 10000 points per measurement channel
• Storage of measured values as well as their transmission to the interface with up to 1000 Hz per measuring channel
• Measurement accuracy:
  • - with internal measuring cell: 0.1 % of [Max]
  • - with external measuring cell: among other things from the measuring cells used
• Overall dimensions W×D×H 71×31×180 mm
• Overload protection: 150 % of [Max] with internal measuring cell
• Thread on load receptor: M6 (outside)
• Battery operation internal, standard, operating time up to 8 h, Charging time approx. 8 h
• External mains adapter, for connection to the USB-C socket, standard
• Net weight approx. 0,4 kg