Subcategories

• 

  SAUTER SW

  <h2>Sound level meter SAUTER SW</h2> <ul><li>Ideal for measurements for workplaces which are outdoors, e.g. at airports, on building sites, in road construction etc. with broad access to spectrum thanks to the highly-accurate 24-Bit A/D converter</li> <li>Floating point evaluation for higher level of accuracy and better stability</li> <li>The optimised analogue frontend switch reduces the ambient noise and increases the linear measuring range</li> <li>A specially-developed algorithm permits a compliant dynamic range of more than 120 dB! (SW 1000: &gt; 123 dB; SW 2000: &gt; 122 dB)</li> <li>Three profiles and 14 user-defined measurements can be calculated in parallel with different frequency and time weighting</li> <li>Different sound pressure levels can be selected, such as, for example, Laeq, LcPeak, LaF, LaFMax, LaFMin, SD, SEL, E</li> <li>LN statistics and display of the graph showing the progression of time</li> <li>User-defined integral interval measurement up to a maximum of 24 hours is possible</li> <li>Frequency weighting (filter) A, B, C, Z</li> <li>Time interval during measurement: F (fast), S (slow), I (pulse)</li> <li>Freely-definable limits for the output of an optical alarm signal</li> <li>Peak Hold Mode to capture peaks</li> <li>Octavo function for targeted sound analysis</li> <li>TRACK function with graphic display of a measurement</li> </ul><p><strong>Technical data</strong></p> <ul><li>Applicable standards: <ul><li>IEC61672-1:2013</li> <li>GB/T3785.1–2010</li> <li>IEC 60651:1979</li> <li>IEC 60804:2000</li> <li>1/1 Octavo in accordance with IEC 61260:2014</li> </ul></li> <li>½ inch microphone</li> <li>Permissible ambient temperature -10 °C/50 °C</li> <li>Output (direct or alternating current)</li> <li>AC (max 5 VRMS), DC (10 mV/DB)</li> <li>Mains operation as standard</li> <li>Optional battery operation, 4× 1.5V AA, not included, operating time up to 10 h</li> <li>Dimensions W×D×H 80×36×300 mm</li> <li>Net weight approx. 400 g</li> </ul><p><strong>SERIE</strong></p> <p><img src="/pictos/pictos-mode-peakhold.png" width="40" height="40" alt="Peak hold function: capturing a peak value within a measuring process." title="Peak hold function: capturing a peak value within a measuring process." /> <img src="/pictos/pictos-memory-internal.png" width="40" height="40" alt="Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc." title="Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc." /> <img src="/pictos/pictos-pc-rs232.png" width="40" height="40" alt="Data interface RS-232: To connect the balance to a printer, PC or network" title="Data interface RS-232: To connect the balance to a printer, PC or network" /> <img src="/pictos/pictos-pc-usb.png" width="40" height="40" alt="USB data interface: To connect the balance to a printer, PC or other peripherals." title="USB data interface: To connect the balance to a printer, PC or other peripherals." /> <img src="/pictos/pictos-pc-analog.png" width="40" height="40" alt="Analog Data Interface" title="Analog Data Interface" /> <img src="/pictos/pictos-software-statistics.png" width="40" height="40" alt="Statistics: using the saved values, the device calculates statistical data, such as average value, standard deviation etc." title="Statistics: using the saved values, the device calculates statistical data, such as average value, standard deviation etc." /> <img src="/pictos/pictos-tol.png" width="40" height="40" alt="Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning." title="Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning." /> <img src="/pictos/pictos-batt.png" width="40" height="40" alt="Battery operation: The battery type is specified for each device." title="Battery operation: The battery type is specified for each device." /> <img src="/pictos/pictos-power-supply.png" width="40" height="40" alt="Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA." title="Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA." /> <img src="/pictos/pictov-warranty2.png" width="40" height="40" alt="2 years warranty" title="2 years warranty" /></p> <p><strong>OPTION</strong></p> <p><img src="/pictos/pictos-software.png" width="40" height="40" alt="PC software: to transfer the measurements from the device to a PC." title="PC software: to transfer the measurements from the device to a PC." /> <img src="/pictos/pictov-cert-iso4.png" width="40" height="40" alt="ISO calibration possible. The time required for ISO calibration is specified in the pictogram." title="ISO calibration possible. The time required for ISO calibration is specified in the pictogram." /></p> <p></p> <div class="box_content"> <div class="clear"></div> <table id="artikel_tabelle_modelle" cellspacing="0" cellpadding="3"><thead><tr><th class="header"> <div class="text">Item number</div> <div class="sort"></div> </th> <th class="header"> <div class="text">Accuracy class</div> <div class="sort"></div> </th> <th class="header"> <div class="text">Frequency range<br />dB</div> </th> <th class="header"> <div class="text">Sensitivity<br />V/Pa</div> </th> </tr></thead><tbody><tr><td> <div id="Artikelnummer" class="standard">SW 1000</div> </td> <td>1</td> <td>0,003–20 kHz</td> <td>50 m V/Pa</td> </tr><tr><td> <div class="standard">SW 2000</div> </td> <td>2</td> <td>0,02–12,5 kHz</td> <td>40 m V/Pa</td> </tr></tbody></table></div>