Force gauge SAUTER FL

Premium force measuring instrument with graphic-assisted display and integrated measuring cell

• Turnable display with backlight
• Real time or Peak Hold Mode to observe transcients or capture peaks
• Metal housing for durable usage in harsh environmental conditions
• Can be mounted on all SAUTER test stands
• Capacity display: A bar lights up to show how much of the measuring range is still available
• Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by a visual signal
• Internal memory for up to 500 measurements
• Continuous analogue output: Linear voltage signal in relation to the load (-2 – +2 V)
• Standard attachments: as shown below
• Selectable measuring units: N, kN, kg, oz, lb
• Delivered in a hard carrying case

Technical data SAUTER FL

• Transfer rate to PC: approx. 25 measured values per second
• Measuring precision: 0,2 % of [Max]
• Overload protection: 120 % of [Max]
• Overall dimensions W×D×H 175×75×30 mm
• Thread: M6
• Rechargeable battery pack integrated,  standard, operating time up to 10 h without backlight, charging time approx. 8 h
• Net weight approx. 0,5 kg

Accessories for SAUTER FL

• Plug-In for data transfer of measuring data from the measuring instrument and transfer to a PC, e.g. in Microsoft Excel®,  SAUTER AFI-1.0
• Data transfer software with graphic  display of the measurement process,  SAUTER AFH FAST
• Force-displacement only in combination  with SAUTER LD, SAUTER AFH LD
• Force-displacement only in combination  with SAUTER LB, SAUTER AFH FD
• USB cable, as standard, can be reordered, SAUTER FL-A01
• Standard attachments for Force gauges 10 - 500 N, 6 items (M6-Thread) - AC 43
• Stainless steel handle bar with rubber grip for safe handling, 1 piece - AFH 04 € 105,00 *
• RS232 adapter cable - FL-A04 € 50,00 *
• M10 External thread, M6 Threaded hole - AFM 05
• M10 External thread, M6 Threaded hole - AFM 07
• M6 Threaded hole, M5 External thread - AFM 102
• M12 Threaded hole, M6 Threaded hole - AFM 15

Features SAUTER FL

• Peak hold function: capturing a peak value within a measuring process.
• Push and Pull: the measuring device can capture tension and compression forces.
• Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc.
• Data interface RS-232: To connect the balance to a printer, PC or network
• USB data interface: To connect the balance to a printer, PC or other peripherals.
• Analog Data Interface
• GLP/ISO record keeping of weighing data with date, time and identification-no. Only with printers from KERN.
• Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
• Measuring with tolerance range  (limit-setting function): Upper and lower limiting can be programmed individually. The process is supported by an audible or visual signal
• Rechargeable battery pack: rechargeable set
• Mains adapter: 100-230V/50-60Hz in standard version for Germany. On request GB or USA version.
• 2 years warranty

ALL MODELS SAUTER FL

Model	Measuring capacity [Max] N	Readability [d] N	Option Calibration Certificate (Tension)	Option Calibration Certificate (Compression)	Option Calibration Certificate (Tension + Comp)
FL 5	5	0,002	-	-	-
FL 10	10	0,005	1	1	1
FL 20	25	0,01	1	1	1
FL 50	50	0,02	1	1	1
FL 100	100	0,05	1	1	1
FL 200	250	0,1	1	1	1
FL 500	500	0,2	1	1	1
FL 1K	1000	0,5	1	1	1