Accessories
Accessories
Subcategories
Height rods
Height rods
Interface cables
Interface cables
Protective working covers
Protective working covers
Ramps
Ramps
Batteries and battery...
Batteries and rechargeable battery packs
Stands
Stands
Software
Data transfer software
for Professional and highly flexible recording or transmission of measured values
in particular also to Microsoft® Excel or Access
Length measuring
Length measuring devices
Hardness testers
Hardness testers
Printers
Printers
Platforms
Platforms
Transport cases
Transport cases for storing and transporting accessories, clamps, sensors, etc.
Display devices
Display devices
Mains adapters
Mains adapters
Various
Various
Sensors
External sensor for SAUTER Ultrasonic thickness gauge and coating thickness gauge
System case (systainer® T-LOC) for storing and transporting accessories, clamps, sensors, etc.
Ethernet adapter to connect force-measuring instruments to an IP-based Ethernet network
- Protective working cover over keyboard and housing
- Suitable for precision balances KERN 572, KERN 573, KERN PKP and KERN PKT
- Similar to illustration
- scope of delivery: 5 items
Glass draught shield for KERN 572, PKP and PKT
Large glass draught shield with 3 sliding doors for easy access to the items being weighed for Precision balances KERN572, KERN PKP and KERN PKT (only for models with weighing plate size Ø 106 mm)
Plug-in power supply type | Power adapter |
Input voltage power supply / power [Max] | 100 V - 230 V |
Input voltage device / power [Max] | 12 V, 300 mA |
Adapter | EU, GB. USA |
Door tester: Handle (length: 300 mm) and two round force receptor plates (∅ 85 mm) as an option to FH 1K up to FH 5K for the safe testing of clamping forces (not approved to DIN 18650 or similar), up to 5 kN
Accessories only (without device and cell)
Protective working cover over keyboard and housing
Scope of delivery: 5 pieces
Suitable for precision balance KERN EW-N/EG-N (only for models with weighing plate size Ø 118 mm)
Rechargeable battery pack internal for Precision balance KERN EW-N/EG-N (only for models with weighing plate size Ø 118 mm and BxT 170x142 mm)
This item can only be ordered with the scale, it is installed at the factory
- Rechargeable battery pack internal
- Suitable for Precision balance KERN EW-N/EG-N (for models with weighing plate size BxT 180x160 mm)
- This item can only be ordered with the scale, it is installed at the factory
Large glass draught shield with 3 sliding doors for easy access to the items being weighed
Weighing space W×D×H 150×140×130 mm
for Precision balance KERN EW-N/EG-N (only for models with weighing plate size Ø 118 mm)
- Loop for underfloor weighing
- Suitable for KERN EG/EW (for models with weighing plate size BxT 180x160 mm)
Suitable for precision balance KERN EWJ
Scope of delivery: 5 pieces
Input voltage: 100-240V ~ 50/60Hz 0.5A
Output voltage: Output: 9V ⎓ 0.3A
Suitable for KERN scales: ECB, ECE, EW-N_EG-N, EMB, EMS, EOE, FCB, FKB-A and PCB
Mains plug with the following adapter: AU | EU | UK | US
- Wall mount for display device
- Dimensions (W×D×H): 200x100x40mm
- for scales NIB, BIC, BID, EOC, IOC, UIB, UID, EOB, EOE, EOS
KERN 474-926 Interface cable RS-232 to connect an external device
cable length approx. 1,5 m
suitable for the series KERN EW-N/EG-N and KERN PES/PEJ (Printer o.e.)
Note: The interface cable is free of charge if you purchase the balance and printer together!
- Data interface RS-232
- Suitable for Analytical balance KERN ACS/ACJ, KERN ABS-N/ABJ-NM
5 x KERN ACS-A02 Protective working cover for KERN ABS-N and ABJ-NM