SAUTER FS 2-200 Premium force gauge with integrated load cell 200N

Use with integrated load cell

The SAUTER FS premium force gauge has an load measuring cell for tensile and compressive force applications. Either mobile for rapid testing or stationary integrated into a test stand or production line, the multifunction display allows all the values recorded to be read off at a glance in real time. Via the integrated interface, the data can be sent to a PC or laptop for further processing.

Use with external load cells

The SAUTER FS premium force gauge is compatible with all SAUTER strain gauge measuring cells, see Measuring Cells. Up to 4 external measuring cells can be connected simultaneously. If an external measuring channel is used, the internal load cell is deactivated as long as an external load cell is connected.

Measurement of forces in different tensile or compression directions possible with only one measuring device

• 3,5" touchscreen with touch pen
• Standard version with 4 measuring channels for external force sensors
• An internal load cell is possible (is deactivated if an external load cell is connected)
• Suitable for 4-wire and 6-wire sensors with strain gauges
• Two-point adjustment with weights or numerical adjustment possible
• The specific data of an external sensor are stored directly in the connector
• USB interface for data transfer and power supply as standard
• Internal device memory (16 GB)
• Tolerance function
• Track function for continuous measurement display
• Peak value measurement
• Mountable on all SAUTER test stands

Supplied in a high-quality and robust system case (systainer® T-LOC) including plug-in power supply and USB cable type C

Tip: Order the practical system case (systainer® T-LOC) for storing and transporting of accessories, clamps, sensors, etc. at the same time, SAUTER FS TKZ, see accessories

Key features

• Peak hold function: capturing a peak value within a measuring process
• Scan mode: continuous capture and display  of measurements
• Push and Pull: the measuring device can capture tension and compression forces
• Memory: Device-internal memory capacity, e.g. for article data, measuring data, tare weights, PLU etc.
• Data Interface USB: For connection to printers, PCs or other peripheral devices
• KERN Communication Protocol (KCP): a standardized interface command set for KERN balances and other instruments, which allows retrieving and controlling all relevant parameters and functions of the device. KERN devices featuring KCP are thus easily integrated with computers, industrial controllers and other digital systems
• Measuring with tolerance range (checkweighing): Upper and lower limit values can be programmed, e.g. for sorting, portioning or for measuring coatings or material thicknesses. The process is supported by an acoustic and/or optical signal
• ZERO: Reset the display to 0
• Rechargeable battery pack: Rechargeable set
• Plug-in power supply: 100-230 V/50-60 Hz in standard version for EU, CH. On request GB, USA or AUS version available
• Package shipment by courier service: The duration of internal product provision is one day

Option

• PC Software: to transfer the measurements from the device to a PC
• Factory calibration (ISO): Factory calibration takes 4 working days
• Accredited calibration (DKD): The duration of the accredited calibration is 3 working days