KERN DLB 160-3A Moisture analyser

Robust moisture analyser for samples up to 160 g

More details

1 053,00 €


1 170,00 €

Add to wishlist

Data sheet

Weighing range [Max]160g
Readout [d]1 mg
Reproducibility1 mg
Option Calibration Certificate+
Weighing units% rH g


  • Backlit LCD display, digit height 17 mm
  1. Current moisture content in %
  2. Unit of the shown result, e.g. moisture, e.g. % moisture
  3. Drying process active

Halogen quartz glass heater 400 W Internal memory for automatic sequence of 5 complete drying processes The last value measured remains on the display until it is replaced by a new measurement 10 sample plates included Application handbook: There are many practical examples in the user manual


  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
  • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
  • Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version.
  • Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 
  • 3 years warranty


  • Calibration certificate possible. The time required for calibration is 3-4 days


14 other products in the same category: