KERN CFS 30K0.5 Counting scale

KERN CFS 30K0.5 Counting scale

KERN
CFS 300-3

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network  Piece counting: Reference quantities selectable. Display can be switched from piece to weight. Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.  Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing

Professional, high-resolution counting scale with 100 item memories and second balance interface, counting resolution up to 75,000 points

TECHNICAL DATA KERN CFS 30K0.5

Weighing capacity [Max] 30 kg
Readability [d] 0,5 g
Units kg, lb
Dimensions weighing surface (W×D) 295×225 mm
Reproducibility 0,5 g
Linearity ± 1 g
Ambient temperature 0 °C – 40 °C
Smallest piece weight when piece counting - normal conditions 5 g
Display type LCD
Display digit height 20 mm
Material weighing plate stainless steel
Material housing plastic
IP protection - complete device IP23
IP protection - load cell IP65
Certificate : without Certificate
Hurry! only 5 items left in stock.
€306.00
€340.00
Save 10%
Tax excluded
Quantity

Add to Compare
Add to Wishlist

Precise, intuitive to use and digital – with our counting scales you can accelerate your annual stock taking processes and thus save time and money

Precise counting: The automatic reference weight optimisation of reference weight gradually improves the average piece weight value

Programmable using numerical key pad:

- required reference quantity

- known reference weight

Three displays for weight display, reference weight, total pieces

Weighing with tolerance range (checkweighing): a visual and audible signal helps with portioning, dispensing or grading

Fill-to-target function: Programmable target quantity or target weight e.g. for checkweighing. A signal will be displayed when the target value is reached

PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels

Second balance interface to construct a high-resolution counting system, standard, e.g. with weighing bridges of KERN KFP V20

Protective working cover included with delivery

: CFS 300-3
Hurry! only 5 items left in stock.

Data sheet

Readout [d]
0,5 g
Reproducibility
0,5g
Linearity
1g
min. Piece weight [Counting]
5 g
Weighing plate dimensions
295 x 225 mm
Weighing units
g kg pcs
Net weight
3,1 kg
Weighing range [Max]
30 kg

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33

You might also like

8 other products in the same category:

   

Viewed products