• -10%
KERN CCS 150K0.01 Counting system
  • KERN CCS 150K0.01 Counting system
  • KERN CCS 150K0.01 Counting system
  • KERN CCS 150K0.01 Counting system
  • KERN CCS 150K0.01 Counting system

Counting scale system KERN CCS 150K0.01

765.00 €Save 10%
850.00 €
Tax excluded

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network  Piece counting: Reference quantities selectable. Display can be switched from piece to weight.  Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.  Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 3 years warranty

Counting system to count the smallest parts in large quantities, maximum number of parts which can be displayed is 999,999

TECHNICAL DATA

Quantity scale - Weighing capacity [Max]150 kg
Reference scale - Readability [d]10 mg
Unitskg, lb
Dimensions weighing platform (W×D×H)500×400×124 mm
Dimensions weighing surface (W×D)500×400 mm
Reproducibility0,00002 kg
Reference scale - Linearity100 mg
Quantity scale - Linearity0,02 kg
Ambient temperature0 °C – 40 °C
Smallest piece weight when piece counting - normal conditions500 mg
Display typeLCD
Display digit height20 mm
Material weighing platestainless steel
Display device cable length3 m
Material housingplastic
Net weight approx.13 kg
IP protection - displayIP23
IP protection - platformIP65
IP protection - load cellIP65
Certificate
  100% buyer protection

Guaranteed with PayPal

  100% secure shipping

Insured and with tracking

  3 year guarantee

100% full processing

Counting scale system KERN CCS 150K0.01

With this highly-accurate counting system KERN CCS you can replace a large spectrum of individual counting scales

Reference scale KERN CFS:

This professional KERN CFS counting scale, which can also be used as a stand-alone scale, meets the highest demands for accuracy, weighing range and volume of items, by beeing connected to a high-capacity weighing bridge 

  • Programmable using numerical key pad:
    • - required reference quantity
    • - known reference weight
  • Memory (PLU) for 100 items with additional text
  • Fill-to-target function: Programmable target weight. An acoustic and visual signal will be displayed when the target value is reached
  • Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value

Quantity scale KERN KFP V20 IP65: 

The high-accuracy quantity counting takes place on the weighing platform (= weighing bridge)

  • Stainless steel platform, painted steel base
  • Aluminium singlepoint load cell (1 x 3000 e), IP65 protection

FEATURES

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Strain gauge measuring system

OPTION

  • Rechargeable battery pack: rechargeable set
  • Calibration with certificate
CCS 150K0.01

Data sheet

Weighing range [Max]
150 kg
Readout [d]
0.01g
min. Piece weight [Counting]
0.5g
Weighing plate dimensions
500 x 400 mm
Material weighing plate
stainless steel
Option Calibration Certificate
yes
Weighing units
kg lb
Net weight
12 kg

Accesories