High mobility: thanks to rechargeable battery operation (optional), compact, flat construction and low weight, it is suitable for use in several locations
Platform: Weighing plate stainless steel, painted steel base, silicone-coated aluminium load cell, protection against dust and water splashes IP65
Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results
Percentage determination: makes it possible to store a given weight value (100 %) and to determine deviations from this target value
Weighing with tolerance range (checkweighing): a visual and audible signal helps with portioning, dispensing or grading
Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value
Benchtop stand incl. wall mount for display device as standard
Weighing instead of counting! Because the counting function is so easy to use, you can rapidly record large numbers of small parts – which saves time and money!
Practical Flip/Flop display device: flexible positioning e.g. free-standing or screwed to the wall (optional). By rotating the upper housing shell you can determine the angle of the display as well as the cable outlet (Factory Option ex works for an additional cost, see Accessories)
Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
Data interface RS-232: To connect the balance to a printer, PC or network
GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
Totalising level A: The weights of similar items can be added together and the total can be printed out.
Percentage determination: Displays the deviation from the reference weight (100%) in % instead of grams.
Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
Vibration-free weighing: (Animal weighing program) Vibrations are filtered out so that a stable weight is obtained.
IP 65 protection in accordance with DIN EN 60529:
Designed for temporary contact with liquids. Use a damp cloth for cleaning. Dustproof.
Universal mains adapter: with universal input and optional input socket adapters for EU, GB, USA
Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing
3 years warranty
Rechargeable battery pack: rechargeable set
Calibration with certificate possible. The time required for calibration is 3-4 days