Prices drop
Active filters
- Readout [d]: 0,005 N
- Readout [d]: 0.001g
- Readout [d]: 0.001g
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1 mg
- Readout [d]: 0.1/0.2/0.5/1 g
- Readout [d]: 0.5/1/2/5 g
- Readout [d]: 1g
- Readout [d]: 1g
- Readout [d]: 1g
- Readout [d]: 1N
- Readout [d]: 2 kg
- Readout [d]: 2 kg
High-quality compact scale with an extra large LCD display and many functions such as weighing, taring, gross, net, counting, percent and minus. With mains and battery operation – in battery operation up to 100 hours of operation.
![]()
Counting system to count the smallest parts in large quantities, maximum number of parts which can be displayed is 999,999
TECHNICAL DATA
| Quantity scale - Weighing capacity [Max] | 15 kg |
| Reference scale - Readability [d] | 1 mg |
| Units | g |
| Dimensions weighing platform (W×D×H) | 300×240×105 mm |
| Dimensions weighing surface (W×D) | 300×240 mm |
| Reproducibility | 0,000002 kg |
| Reference scale - Linearity | 4 mg |
| Quantity scale - Linearity | 0,0015 kg |
| Ambient temperature | 0 °C – 40 °C |
| Smallest piece weight when piece counting - normal conditions | 50 mg |
| Display type | LCD |
| Display digit height | 20 mm |
| Material weighing plate | stainless steel |
| Display device cable length | 3 m |
| Material housing | plastic |
| Net weight approx. | 7 kg |
| IP protection - display | IP23 |
| IP protection - platform | IP65 |
| IP protection - load cell | IP65 |
All-round parcel scale with practical Flip/Flop display device for greatest ease of use
KERN UFA 6T-3 Highly versatile weighing beams (IP67) for large loads to 6 t
.
.
.
.
.
.
.
.
.![]()
KERN UFA 6T-3L Highly versatile weighing beams (IP67) for large loads to 6 t
.
.
.
.
.
.
.
.
.![]()
Checking the consistency of sprayed concrete is essential to ensure the maximum strength of the concrete during the curing process
The FC 1K-BT determines exactly the forces required for the needle to penetrate the concrete. This allows reliable conclusions to be made regarding the compressive strength of the concrete during the dry phase
.
.
.
.
.
.
.
.
.
.
.![]()
.
.
.
.
.
.
.
.![]()
- 3.5" touch screen
- Standard version with 2 or 4 measuring channels for external force sensors (subsequently expandable from 2 to 4)
- An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
- Suitable for 4-wire and 6-wire sensors with strain gauges
- Two-point adjustment with weights or numerical adjustment is possible
- The specific data of an external sensor are stored directly in the connector
- USB interface for programming, data transfer and power supply
- Integrated SD card memory
- Adjustable SI units: kg, N, kN, Nm, kNm
- Tolerance function
- TRACK function for continuous display of the measurement
- Peak value measurement























