Counting scale system KERN CCS 60K0.1
   

Counting scale system KERN CCS 60K0.1

KERN
CCS 60K0.1

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network  Piece counting: Reference quantities selectable. Display can be switched from piece to weight.

 Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.  Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 3 years warranty

Certificate : without Certificate
Hurry! only 9 items left in stock.
€657.00
€730.00
Save 10%
Tax excluded
Quantity

Add to Compare
Add to Wishlist

Counting scale system KERN CCS 60K0.1

With this highly-accurate counting system KERN CCS you can replace a large spectrum of individual counting scales

Reference scale KERN CFS:

This professional KERN CFS counting scale, which can also be used as a stand-alone scale, meets the highest demands for accuracy, weighing range and volume of items, by beeing connected to a high-capacity weighing bridge 

  • Programmable using numerical key pad:
    • - required reference quantity
    • - known reference weight
  • Memory (PLU) for 100 items with additional text
  • Fill-to-target function: Programmable target weight. An acoustic and visual signal will be displayed when the target value is reached
  • Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value

Quantity scale KERN KFP V20 IP65: 

The high-accuracy quantity counting takes place on the weighing platform (= weighing bridge)

  • Stainless steel platform, painted steel base
  • Aluminium singlepoint load cell (1 x 3000 e), IP65 protection

FEATURES

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Strain gauge measuring system

OPTION

  • Rechargeable battery pack: rechargeable set
  • Calibration with certificate
: CCS 60K0.1
Hurry! only 9 items left in stock.

Data sheet

Readout [d]
0.1g
min. Piece weight [Counting]
1g
Weighing plate dimensions
400 x 300 mm
Material weighing plate
stainless steel
Option Calibration Certificate
yes
Weighing units
kg lb
Net weight
12.5 kg
Weighing range [Max]
60 kg

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33

You might also like

11 other products in the same category:

   

Viewed products