- -10%
SAUTER TVL Manual test stand
436.50 €Save 10%
485.00 €
Tax excluded
Manual test stand for highly accurate tensile and compressive force measurements, with length measurement
| Generated force [Max] | 1 kN |
| Traverse distance [Max] | 230 mm |
| Type of drive | manual crank handle |
| Length measuring device | Length measuring device with display |
| Material housing | metal, lacquered |
| Dimensions completely mounted (W×D×H) | 151×234×465 mm |
| Travel distance per knob rotation (stroke per one turn) | 3 mm |
SAUTER TVL Manual test stand
for highly accurate tensile and compressive force measurement with length measurement
- For vertical and horizontal use
- Precise measurement results
- High level of security with repeated measurements
- Large base plate with various holes for fixture mountings
- can be combined with all devicesCan be used for force gauges up to 500 N
- Digital length meter
- - Measuring range: 230 mm
- - Readout: 0,01 mm
- - Zero setting possible
- - Pre-length can be set manually
- Max travel from base plate: 297 mm
- Travel distance per knob rotation (one stroke): 3,1 mm
- Dimensions (W×D×H): 151 x 234 x 465 mm
TVL
Manual test stand for highly accurate tensile and compressive force measurements, with length measurement
| Generated force [Max] | 1 kN |
| Traverse distance [Max] | 230 mm |
| Type of drive | manual crank handle |
| Length measuring device | Length measuring device with display |
| Material housing | metal, lacquered |
| Dimensions completely mounted (W×D×H) | 151×234×465 mm |
| Travel distance per knob rotation (stroke per one turn) | 3 mm |