Ultrasonic thickness gauge SAUTER TU 300-0.01US

• External sensor for difficult-to-access measurements
• Base plate for adjustment included
• Data interface RS-232
• Delivered in a hard carrying case
• Scan mode (10 measurements per sec.) or single point measuring mode possible
• Internal memory for up to 20 files (with up to 100 values per file)
• Function to set limits, programming of Max./Min., in pull and push direction, with output of audible and optical signal. Ideal mode for efficient and accurate testing of standard parts
• Selectable measuring units: mm, inch

Ultrasonic thickness gauge SAUTER TU 300-0.01US

• Calibration block: standard for adjusting or correcting the measuring device.
• Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
• Data interface RS-232: To connect the balance to a printer, PC or network
• Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
• Zero setting
• Battery operation: The battery type is specified for each device.
• 2 years warranty

Options/Accessories

• Software, interface cable included, SAUTER ATU-04
• External sensor, 2,5 MHz, Ø 14 mm, for thick samples, in particular cast iron with rough upper surfaces: Measuring range 3 – 300 mm (steel), SAUTER ATU-US01
• External sensor, 7 MHz, Ø 6 mm, for thin test materials: Measuring range 0,75 – 80 mm (steel), SAUTER ATU-US02
• External sensor, 5 MHz, Ø 12 mm, for hot test materials: Measuring range (steel) 3 – 200 mm at temperatures of up to 300 °C, SAUTER ATB-US02
• External sensor, 5 MHz, Ø 10 mm, SAUTER ATU-US09
• External sensor, 5 MHz, Ø 10 mm, transducer at an angle of 90°, SAUTER ATU-US10
• External sensor, 6 MHz, Ø 6 mm, for thin test materials: Measuring range