shop by category

Home

Filter By

Availability

Availability

Price

Price

  • €64.00 - €7,280.00

Categories

Categories

Weighing range [Max]

Weighing range [Max]

Readout [d]

Readout [d]

Brand

Brand

Weight

Weight

  • 0.5 kg - 25 kg

Certificate

Certificate

Left Banner

  • KERN

Prices drop

Active filters

  • Availability: In stock
  • Availability: Not available
  • Readout [d]: 0,02 N
  • Readout [d]: 0,02 N
  • Readout [d]: 0,5 g
  • Readout [d]: 0,5 g
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1 mg
  • Readout [d]: 0.1/0.2/0.5/1 g
  • Readout [d]: 1g
  • Readout [d]: 1g
  • Readout [d]: 1g

There are 26 products.

Filter By

Availability

Availability

Price

Price

  • €64.00 - €7,280.00

Categories

Categories

Weighing range [Max]

Weighing range [Max]

Readout [d]

Readout [d]

Brand

Brand

Weight

Weight

  • 0.5 kg - 25 kg

Certificate

Certificate

KERN KERN CFS 30K0.5 Counting scale

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network  Piece counting: Reference quantities selectable. Display can be switched from piece to weight. Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.  Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing

Professional, high-resolution counting scale with 100 item memories and second balance interface, counting resolution up to 75,000 points

TECHNICAL DATA KERN CFS 30K0.5

Weighing capacity [Max] 30 kg
Readability [d] 0,5 g
Units kg, lb
Dimensions weighing surface (W×D) 295×225 mm
Reproducibility 0,5 g
Linearity ± 1 g
Ambient temperature 0 °C – 40 °C
Smallest piece weight when piece counting - normal conditions 5 g
Display type LCD
Display digit height 20 mm
Material weighing plate stainless steel
Material housing plastic
IP protection - complete device IP23
IP protection - load cell IP65
€306.00 Regular price €340.00
SAUTER SAUTER FS 2-100 force gauge with 2 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 2 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€945.00 Regular price €1,050.00