Subcategories

• 

  KERN CCA

  

  Counting scale system KERN CCA

• 

  KERN CCS

  

  Counting scale system KERN CCS

  With this highly-accurate counting system KERN CCS you can replace a large spectrum of individual counting scales

  Reference scale KERN CFS:

  This professional KERN CFS counting scale, which can also be used as a stand-alone scale, meets the highest demands for accuracy, weighing range and volume of items, by beeing connected to a high-capacity weighing bridge 

  • Programmable using numerical key pad:
    • - required reference quantity
    • - known reference weight
  • Memory (PLU) for 100 items with additional text
  • Fill-to-target function: Programmable target weight. An acoustic and visual signal will be displayed when the target value is reached
  • Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value

  Quantity scale KERN KFP V20 IP65: 

  The high-accuracy quantity counting takes place on the weighing platform (= weighing bridge)

  • Stainless steel platform, painted steel base
  • Aluminium singlepoint load cell (1 x 3000 e), IP65 protection

  FEATURES

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Strain gauge measuring system

  OPTION

  • Rechargeable battery pack: rechargeable set
  • Calibration with certificate
• 

  KERN CDS

  

  Counting scale KERN CDS

  Self-explanatory graphic control panel. The counting process can be understood immediately even without operating instructions

  - No learning time = reduces costs

  - Ideal for untrained users

  - Visualised process avoids operating errors

  The 4 steps are carried out from left to right:

  1. Place the empty container onto the weighing plate and tare by pressing the TARE key

  2. Place the reference quantity for the goods to be counted into the container (5, 10 or 20 pieces)

  3. Confirm the selected reference quantity by pressing the key (5, 10 or 20)

  4. Pour in the goods to be counted. The number of pieces will immediately be shown in the display

  Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value

  KERN Universal Port (KUP): permits the connection of an external KUP interface adapter, such as, for example, RS 232 or USB, for the exchange of data and control commands, without any installation outlay

  KERN Communication Protocol (KCP): The KCP permits searching and remote control of the balance using external control devices or computers

  Standardised, simplified concept of operation

  Protective working cover included with delivery

  Characteristics KERN CDS

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • KERN Universal Port (KUP): permits the connection of an external KUP interface adapter, such as, for example, RS 232 or USB, for the exchange of data and control commands, without any installation outlay
  • KERN Communication Protocol (KCP): The KCP permits searching and remote control of the balance using external control devices or computers
  • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Universal mains adapter: with universal input and optional input socket adapters for EU, GB, USA
  • Measuring system: Strain gauge

  Option

  • Data interface RS-232: To connect the balance to a printer, PC or network
  • USB data interface: To connect the balance to a printer, PC or other peripherals.
  • Suspended weighing: load support with hook on the underside of the balance.
  • Calibration certificate possible

  All Models

  Model	Weighing capacity [Max] kg	Readability [d] g	Min. piece weight (Normal) g/piece	Counting resolution Points	Weighing plate W×D×H mm	Option Calibration Certificate
  CDS 4K0.02	4	0,02	0,2	200000	228×228×95	1
  CDS 15K0.05	15	0,05	0,5	300000	308×318×75	1
  CDS 16K0.1	16	0,1	1	160000	308×318×75	1
  CDS 30K0.1	30	0,1	1	300000	308×318×75	1
  CDS 30K0.1L	30	0,1	1	300000	500×400×125	1
  CDS 36K0.2L	36	0,2	2	180000	500×400×125	1
  CDS 60K0.2	60	0,2	2	300000	500×400×125	1

• 

  KERN CFS

  

  Counting scale KERN CFS

  • Memory (PLU) for 100 items with additional text, reference weight and tare weight, e.g. of a container
  • Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value
  • Checkweighing: A visual and audible signal assists with portion division, dispensing or grading
  • Programmable using numerical key pad:
    • required reference quantity
    • known reference weight
  • Three displays for total weight piece weight, total quantity
  • Fill-to-target function
  • Programmable target quantity or target weight. A signal will be displayed when the target value is reached
  • PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels
  • Protective working cover included with delivery

  Features KERN CFS

  • Calibration program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Strain gauge measuring system

• 

  KERN CPB

  

  Counting scale KERN CPB Professional model

  • Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value
  • Programmable using numerical key pad:
  • - required reference quantity
  • - known reference weight
  • Three displays for total weight (verifiable), piece weight, total quantity
  • Counting results memory: adds up all individual piece counts, result is shown in total weight and total pieces
  • Audible Fill-to-target: target quantity or target weight can be programmed, e.g. for checkweighing. When the target value is reached, a signal will sound
  • PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels
  • High mobility: thanks to battery operation (optional), compact, flat construction and low weight, it is suitable for use in several locations (production, warehouse, dispatch department,...)
  • Two balances in one: Changes from counting mode to weighing mode at the touch of a key
  • Protective working cover included with delivery
• 

  KERN CPE

  

  Counting scale KERN CPE

  • Three displays for weight display, reference weight, total pieces
  • High mobility: thanks to rechargeable battery operation, compact, lightweight construction, it is suitable for the use in several locations (production, warehouse, dispatch department etc.)
  • Compact size, practical for small spaces
  • Weighing with tolerance range (checkweighing): a visual and audible signal helps with portioning, dispensing or grading
  • Totalising of weights

  Characteristics KERN CPE

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Totalising level A: The weights of similar items can be added together and the total can be printed out.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Rechargeable battery pack: rechargeable set
  • Universal mains adapter: with universal input and optional input socket adapters for EU, GB
  • Measuring system: Strain gauge

  Technical data KERN CPE:

  • Casing material: Plastic
  • Dimensions housing (W×D×H):315 mm x 355 mm x 110 mm
  • Level indicator:yes
  • Material weighing plate:stainless steel
  • Revolving screw feet:yes
  • Weighing surface (WxD):230 mm x 300 mm
  • Display digit height (large):20 mm
  • Input voltage:100 V - 240 V 50 / 60 Hz
  • Adjustment options:External calibration
  • Eccentric loading at 1/3 [Max]: 1 g
  • Stabilisation time under laboratory conditions:2 s
  • Warm up time:2 h
  • Weighing capacity [Max]:6 kg
  • Weighing system:Strain gauge
  • Weighing units: pcs kg g

  All Models

  Model	Weighing capacity [Max] kg	Readability [d] g	Min. piece weight (Normal) g/piece	Option Calibration Certificate
  CPE 6K-3	6	0,2	1	1
  CPE 15K-3	15	0,5	2,5	1
  CPE 30K-3	30	1	5	1

• 

  KERN CXB

  Counting scale KERN CXB - entry level model for professional counting

  • Precise counting: The automatic reference weight optimisation of reference weight gradually improves the averag piece weight value
  • Programmable using numerical key pad:
    1. required reference quantity
    2. known reference weight
  • Three displays for
    1. Total weight (verifiable)
    2. Piece weight
    3. Total count
  • Audible Fill-to-target: target quantity or target weight can be programmed. When the target value is reached, a signal will sound
  • Counting results memory: adds up all individual piece counts, result is shown in total weight and total pieces
  • Energy management: Backlight turns off after 5 sec
  • Two balances in one: Changes from counting mode to weighing mode at the touch of a key
  • PRE-TARE function for manual subtraction of a known container weight, value can be saved
  • Weighing plate dimensions, stainless steel, WxD 300x225 mm

• 

  KERN CKE

  

  Counting scale KERN CKE

  Easy to use, self-explanatory counting scale with laboratory accuracy

  Self-explanatory graphic control panel, the workings steps can be understood immediately, even without operating instructions

  • - no learning time = reduces costs
  • - ideal for untrained users
  • - visualised process avoids operating errors avoids

  The 4 steps are carried out from left to right:

  • 1. Place the empty container onto the weighing plate and tare by pressing the TARE key
  • 2. Place the reference quantity for the goods to be counted into the container (5, 10 or 20 pieces)
  • 3. Confirm the selected reference quantity by pressing the key (5, 10 or 20)
  • 4. Pour in the goods to be counted. The number of pieces will immediately be shown in the display

  Precise counting: The automatic optimisation of reference weight gradually improves the average value of the piece weight

  Checkweighing: A visual and audible signal assists with portion division, dispensing or grading

  Two scales in one: Switching from counting mode to weighing mode at the touch of a key

  Draught shield standard for models with weighing plate size Ø 81, weighing space Ø 90 × 40 mm

  Battery operation possible, batteries 6×1.5 V Size C not standard, operating time up to 80 h

  Protective working cover included with delivery

  Searching and remote control of the balance using external control devices or computers with the KERN Communication Protocol (KCP). KCP is a standardised interface command structure for KERN balances and other instruments which allows you to recall and manage all relevant parameters and device functions. You can therefore simply connect KERN devices with KCP to computers, industrial control systems and other digital systems. In a large number of cases the KCP is compatible with the MT-SICS protocol. Only possible through data interface RS-232, other interfaces on request.

  Features KERN CKE

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • KERN KCP Protocol
  • GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Battery operation: The battery type is specified for each device.
  • Universal mains adapter: with universal input and optional input socket adapters for EU, GB, USA
  • Suspended weighing: load support with hook on the underside of the balance.
  • Measuring Systen: Strain gauge

  Option

  • Rechargeable battery pack: rechargeable set
  • Calibration certificate possible
  • USB data interface: To connect the balance to a printer, PC or other peripherals.

  Technical data KERN CKE

  • Dimensions housing (W×D×H):350 mm x 390 mm x 120 mm
  • Level indicator
  • Material weighing plate: stainless steel
  • Revolving screw feet
  • Weighing surface (WxD):340 mm x 240 mm
  • Battery:6×1.5 V AAA
  • Input voltage:110 V - 240 V AC
  • Mains adapter: Mains adapter external
  • Mains adapter/adapter included: EURO CH US UK
  • Rechargeable battery:Rchrg. battery optional - intern
  • Adjustment options: External calibration
  • Recommended adjusting weight: (F1)
  • Stabilisation time under laboratory conditions:3 s
  • Warm up time:2 h
  • Weighing system: Strain gauge
  • Weighing units: dwt custom factor gn oz PCS ozt kg g lb

  ALL MODELS

  Model	Weighing capacity [Max] kg	Read- ability [d] g	Min. piece weight (Normal) g/piece	Weighing plate mm	Option DAkkS Calibration Certificate
  CKE 6K0.02	6	0,02	0,2	340×240	1
  CKE 8K0.05	8	0,05	0,5	340×240	1
  CKE 16K0.1	16	0,1	1	340×240	1
  CKE 16K0.05	16	0,05	0,5	340×240	1
  CKE 36K0.1	36	0,1	1	340×240	1
  CKE 65K0.2	65	0,2	2	340×240	1

• 

  KERN IFS

  

  Counting scale KERN IFS

  Industrial counting scale KERN IFS with convenient decimal keypad for easy data entry

  Tough industry standard suitable for use in harsh applications

  Ergonomic display device with large keypad and high-contrast LCD display for easy entry and reading of, e.g., tare weights, reference weights, limit values etc.

  Precise counting: The manual reference weight optimisation gradually improves the average value of the piece weight

  Totalising of pieces when counting

  Three displays for total weight (verifiable), piece weight, total quantity

  100 item memories for master data, such as item number, PRE-TARE (container weight), reference quantity, refere. weight etc.

  Printout with date and time

  Protective working cover included with delivery

  Features KERN IFS

  • Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
  • Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc.
  • Data interface RS-232: To connect the balance to a printer, PC or network
  • KERN Communication Protocol
  • GLP/ISO log: the balance displays the weight, date and time, regardless of printer connected
  • Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
  • Totalising level A: The weights of similar items can be added together and the total can be printed out.
  • Percentage determination: Displays the deviation from the reference weight (100%) in % instead of grams.
  • Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
  • Universal mains adapter: with universal input and optional input socket adapters for EU, GB
  • Measuring system: Strain gauge
  • Dual-range balance switches automatically to the next largest weighing capacity [Max] and readibility [d]

  All Models

  Model	Weighing capacity [Max]	Readability [d]	Verification value [e]	Repeatability	Linearity	Counting resolution	Mininum piece weight (counting)	Verification	Calibration Certificate
  IFS 6K-4S	3 | 6	0,1 | 0,2		0,1 | 0,2	0,1 | 0,2	60000	1	-	1
  IFS 10K-4	6 | 15	0,1 | 0,2		0,1 | 0,2	0,4 | 0,8	75000	2	-	1
  IFS 30K0.2DL	12 | 30	0,2 | 0,5		0,2 | 0,5	0,8 | 2	60000	5	-	1
  IFS 60K0.5D	30 | 60	0,5 | 1		0,5 | 1	2 | 4	60000	10	-	1
  IFS 60K0.5DL	30 | 60	0,5 | 1		0,5 | 1	3 | 6	60000	10	-	1
  IFS 100K-3	75 | 150	1 | 2		1 | 2	6 | 10	60000	25	-	1
  IFS 100K-3L	75 | 150	1 | 2		1 | 2	6 | 10	60000	25	-	1
  IFS 300K-3	150 | 300	2 | 5		2 | 5	14 | 30	60000	50	-	1
  IFS 6K-3SM	3 | 6	1 | 2	1 | 2	1 | 2	1 | 2	60000	1	1	1
  IFS 6K-3M	3 | 6	1 | 2	1 | 2	1 | 2	1 | 2	60000	1	1	1
  IFS 10K-3M	6 | 15	2 | 5	2 | 5	2 | 5	2 | 5	75000	2	1	1
  IFS 10K-3LM	6 | 15	2 | 5	2 | 5	2 | 5	2 | 5	75000	2	1	1
  IFS 30K-3M	15 | 30	5 | 10	5 | 10	5 | 10	5 | 10	60000	5	1	1
  IFS 60K-2M	30 | 60	10 | 20	10 | 20	10 | 20	10 | 20	60000	10	1	1
  IFS 60K-2LM	30 | 60	10 | 20	10 | 20	10 | 20	10 | 20	60000	10	1	1
  IFS 100K-2M	60 | 150	20 | 50	20 | 50	20 | 50	20 | 50	60000	25	1	1
  IFS 100K-2LM	60 | 150	20 | 50	20 | 50	20 | 50	20 | 50	60000	25	1	1
  IFS 300K-2M	150 | 300	50 | 100	50 | 100	50 | 100	50 | 100	60000	50	1	1

  Note: For applications that require verification, please order verification at the same time, initial verification at a later date is not possible. Verification at the factory, we need to know the full address of the location of use.

• 

  Soehnle 5816

  

  Soehnle SC counting and checkweighing scale combines precision with versatility for the metal, electrical, pharmaceutical, chemical and logistics industries. Choose the ideal complete scale for your specific requirements from a range of terminals, weighing ranges and graduations.

  Construction

  Low-maintenance, robust construction with solid overload protection.

  Levelling

  The integrated spirit level indicates whether the scale is horizontal and helps with correct levelling.

  Design 

  Hygienic design made of 1.4301 stainless steel.

  Adjustable feet

  Scales can be levelled up to 10 mm using 4 adjustable feet, enabling precise alignment on uneven surfaces.

  Load cell

  High accuracy and reproducibility due to specially balanced load cells

  Characteristics Weighing platforms

  • High resolution up to 75,000 d
  • Robust construction with solid overload protection
  • Fast and stable scale stabilisation, even in rough Environments
  • High accuracy and reproducibility due to specially balanced load cells
  • Weighing platform made of aluminium, weighing platform made of type 1.4301 stainless steel
  • DMS load cell made of aluminium alloy
  • Measuring cable length: 2.5 m
  • Level the scales up to 10 mm using the 4 levelling feet and the spirit Level
  • Operating temperature: -10 °C to + 40 °C
  • Innovative design
  • Lightweight due to extruded aluminium profile
  • Tamper-proof mechanical overload protection to protect the load cell
  • Minimal stabilisation time due to high flexural strength of the weighing platform
  • The wide range of model variants opens up numerous possibilities for use in a variety of applications
  • Hygienic design avoids contamination and protects against the ingress of impurities