SAUTER 287-A02 Hook for spring balances 10-1000 g
Flat square-shaped sensor for lateral power sensing of back, chest or arm up to 1 kN, inner thread: M6
| Material | aluminium |
| Material housing | aluminium |
| Net weight approx. | 0,20 kg |
| Mounting - force dissipation | Threaded hole M6 |
Screw Tension Clamp for laboratory tensile force measurements
| Tensile/compressive force [Max] | 5 kN |
| Maximum clamp width | 100 mm |
| Clamping width | 50 mm |
| Material | aluminium |
| Net weight | 2,6 kg |
| Mounting - force dissipation | Threaded hole M6, External thread M12 |
| Dimensions completely mounted (W×D×H) | 226×145×50 mm |
Round sensor to measure particular muscle groups, such as, for example, the shoulder up to 1 kN, inner thread: M6
| Material | aluminium |
| Material housing | aluminium |
| Net weight approx. | 0,20 kg |
| Mounting - force dissipation | Threaded hole M6 |
Ideal for torque testing of bottles and other packaging with screw tops
Transport case for Ultrasound hardness testing device SAUTER HO-M
Delivery only case, without devices
Mechanical force measurement with quality spring for long service life
| Measuring range force [Max] (N) | 1 N |
| Readability force [d] (N) | 0,01 N; 0,05 N |
| Tolerance (% of [Max]) | 0,3% |
| Load support (tensile force) | Hook |
| Length unloaded (l [Min]) | 230 mm |
| Length loaded (l [Max]) | 335 mm |
| Housing diameter (Ø) | 12,2 mm |
| Dimensions completely mounted (W×D×H) | 230×12,2×12,2 mm |
| Material housing | plastic |
External impact sensor Type DC for Mobile Leeb hardness tester SAUTER
Short impact sensor for tests in holes or hollowed objects
| Tensile/compressive force [Max] | 5 kN |
| Maximum clamp width | 50 mm |
| Clamping width | 15 mm |
| Material | aluminium |
| Net weight | 1,3 kg |
| Mounting - force dissipation | Threaded hole M6, External thread M12 |
Delivery date on request
Practical measuring device for measuring the thickness of layers for daily use
| Measuring range coating thickness [d] (µm) | 100 µm; 1000 µm |
| Readability coating thickness [d] (µm) | 0,1 µm; 1 µm |
| Tolerance (% of [Max]) | 3% |
| Units | µm, inch (mil) |
| Coating thickness gauge sensor type | FE |
| Test object thickness coating | Non-magnetic coatings on iron, steel, Type F |
| Battery | 4×1.5 V AA |
| Increase in measurement accuracy possible | |
| Material housing | plastic |
| Dimensions completely mounted (W×D×H) | 161×69×32 mm |
| Cable length | 1 m |
| Sensor placement position | external |
| Tensile/compressive force [Max] | 10 kN |
| Maximum clamp width | 10 mm |
| Clamping width | 8 mm |
| Material | steel |
| Net weight | 3 kg |
| Mounting - force dissipation | Threaded hole M6, External thread M12 |
| Dimensions completely mounted (W×D×H) | 134×60×40 mm |
Calibration foils for increased measuring accuracy (covers the range from 20 up to 2000 µm, with ˂ 3 % tolerance)
ATE 01 Sensor, Type F for SAUTER Digital coating thickness gauge
Type F: Coatings on steel and iron
Practical measuring device for measuring the thickness of layers for daily use
| Measuring range coating thickness [d] (µm) | 100 µm; 1000 µm |
| Readability coating thickness [d] (µm) | 0,1 µm; 1 µm |
| Tolerance (% of [Max]) | 3% |
| Units | µm, inch (mil) |
| Coating thickness gauge sensor type | FE, NFE |
| Test object thickness coating | Non-magnetic coatings on iron, steel, Type F, Coatings on non-magnetic metals, type N |
| Battery | 4×1.5 V AA |
| Increase in measurement accuracy possible | |
| Material housing | plastic |
| Dimensions completely mounted (W×D×H) | 161×69×32 mm |
| Cable length | 1 m |
| Sensor placement position | external |
Ergonomic design and external measuring head for highest ease of use
| Measuring range coating thickness [d] (µm) | 100 µm; 1250 µm |
| Readability coating thickness [d] (µm) | 0,1 µm; 1 µm |
| Tolerance (% of [Max]) | 3% |
| Units | µm, inch (mil) |
| Coating thickness gauge sensor type | FE |
| Test object thickness coating | Non-magnetic coatings on iron, steel, Type F |
| Battery | 4×1.5 V AAA |
| Increase in measurement accuracy possible | |
| Material housing | plastic |
| Dimensions completely mounted (W×D×H) | 131×65×28 mm |
| Sensor placement position | external |
Premium coating thickness gauge for paint layer, lacquer layer etc.
| Measuring range coating thickness [d] (µm) | 100 µm; 1250 µm |
| Readability coating thickness [d] (µm) | 0,1 µm; 1 µm |
| Tolerance (% of [Max]) | 3% |
| Units | µm, inch (mil) |
| Coating thickness gauge sensor type | FE, NFE |
| Test object thickness coating | Non-magnetic coatings on iron, steel, Type F, Coatings on non-magnetic metals, type N |
| Battery | 2×1.5 V AAA |
| Memory function | |
| Statistic function | |
| Increase in measurement accuracy possible | |
| Continuous capture possible | |
| Material housing | plastic |
| Dimensions completely mounted (W×D×H) | 130×64×32 mm |
| Cable length | 1 m |
| Sensor placement position | external |
6-wire connection: 2 additional wires to maintain a constant voltage supply at the load cell when used with proper instrumentation. Use specially when long wires and wide temperature range
fits for digital coating thickness gauge TG 1250-0.1FN
magnetic and non magnetic
Reliable material thickness gauge for daily use
TB 200-0.1US-RED Can only analyse these materials: cast iron, aluminium, copper, brass, zinc, quartz glass, polyehylene, PVC, grey cast iron, nodular cast iron, steel
| Material thickness pulse-echo [Max] (mm) | 200 mm |
| Material thickness pulse-echo [Min] (mm) | 1,5 mm |
| Measuring range pulse-echo | 1,5 mm – 200 mm |
| Measuring range echo-echo | – |
| Readability material thickness [d] (mm) | 0,1 mm |
| Tolerance (% of [Max]) | 0,5% |
| Units | mm, inch |
| Speed of sound [Max] (m/s) | 9999 m/s |
| Speed of sound [Min] (m/s) | 500 m/s |
| Speed of sound | 500 m/s – 9999 m/s |
| Measuring head measuring frequency | 5 MHz |
| Battery | 4×1.5 V AA |
| Material housing | plastic |
| Dimensions completely mounted (W×D×H) | 161×68×32 mm |
| Cable length | 0,9 m |
Deutsch
English
Français
Italiano
Español
