KERN DAB 200-2 Moisture analyser 0,01g / 0,050%

KERN DAB 200-2 Moisture analyser with user-friendly graphics display and 15 memories for drying programs

• Backlit LCD display, digit height 14 mm
  • Drying process active
  • Active heating profile
  • Active switch-off criteria
  • Previous drying time
  • Current temperature
  • Unit of the shown result, e.g. moisture [%]
  • Interim result in moisture-%
• Halogen quartz glass heater 400 W
• Observation window above the sample, useful during initial setting
• Internal memory for automatic sequence of 15 complete drying processesand 5 drying processes carried out
• The last value measured remains on the display until it is replaced by a new measurement
• 50 sample plates included
• Application handbook: On the internet, you will find a practical application handbook containing many examples, field reports, settings and tips for each KERN moisture analyser

• Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
• Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
• Data interface RS-232: To connect the balance to a printer, PC or network
• GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
• Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
• Mains part: mains part integrated in the balance. 230V/50Hz Standard type D
• Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing 
• 3 years warranty

• Calibration certificate possible. The time required for calibration is 3-4 days