shop by category

Home

Filter By

Availability

Availability

Selections

Selections

Price

Price

  • €21.00 - €13,436.00

Categories

Categories

Weighing range [Max]

Weighing range [Max]

Readout [d]

Readout [d]

Weight

Weight

  • 0.1 kg - 160 kg

Certificate

Certificate

Left Banner

  • LeftBanner 1

List of products by brand SAUTER

Active filters

  • Selections: Discounted
  • Categories: Measuring
  • Categories: Weighing

There are 221 products.

Filter By

Availability

Availability

Selections

Selections

Price

Price

  • €21.00 - €13,436.00

Categories

Categories

Weighing range [Max]

Weighing range [Max]

Readout [d]

Readout [d]

Weight

Weight

  • 0.1 kg - 160 kg

Certificate

Certificate

SAUTER SAUTER BSWA-01 Calibrator for sound level meter

Calibrator for regular adjustment of the sound level meter, class 1, as well as testing the linearity of sound level meters

  • - Applicable standards: IEC60942:2003 Class 1, ANSI S1.40-1984, GB/T 15173-1994.
  • - Output frequency 1 kHz (+/- 0,5 %)
  • - Output of acoustic pressure, can be selected at 94 dB or 114 dB (± 0.3 dB)
  • - Distortion factor ˂ 2 %
  • - Stabilisation time ˂ 10 s
  • - Permissible ambient temperature range -10 °C/50 °C
  • - The calibrator is designed for ½" as well as ¼" microphones (adapter included in the delivery) in accordance with the IEC 61094-4 standard
  • - Battery operation, 2× 1.5 V AA, not standard, operating time up to 40 hours
  • - Dimensions W×D×H 70×70×48 mm
  • - Net weight approx. 137 g
€720.00 Regular price €800.00
SAUTER SAUTER TVO 1000N500S-LD motorised test stand with length...

Practical set for force-displacement-measurements in laboratory and industry

Technical Data

Generated force [Max] 1 kN
Traverse distance [Max] 500 mm
Type of drive Stepper motor
Length measuring device Length measuring device with data interface
Input voltage power supply / power [Max] 230 V AC, 50 Hz
Limit switch
Repeat function
Speed display
Dimensions completely mounted (W×D×H) 980×405×265 mm
Transversal movement speed [Min] 1 mm/min
Transversal movement speed [Max] 500 mm/min
Measurement alignment vertical
€4,725.00 Regular price €5,250.00
SAUTER SAUTER TVO 2000N500S Motorised vertical test stand

Premium test stand in table-top version – with precise step motor

Technical Data

Generated force [Max] 2 kN
Traverse distance [Max] 700 mm
Type of drive Stepper motor
Input voltage power supply / power [Max] 230 V AC, 50 Hz
Repeat function
Speed display
Dimensions completely mounted (W×D×H) 1185×465×300 mm
Transversal movement speed [Min] 1 mm/min
Transversal movement speed [Max] 500 mm/min
€5,220.00 Regular price €5,800.00
SAUTER SAUTER FS 2-20 force gauge

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 2 or 4 measuring channels for external force sensors (subsequently expandable from 2 to 4)
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€963.00 Regular price €1,070.00
SAUTER SAUTER FS 2-50 force gauge with 2 channel measurement

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 2 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€945.00 Regular price €1,050.00
SAUTER SAUTER FS 2-100 force gauge with 2 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 2 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€945.00 Regular price €1,050.00
SAUTER SAUTER FS 2-200 force gauge with 2 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 2 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€945.00 Regular price €1,050.00
SAUTER SAUTER FS 2-500 force gauge with 2 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 2 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€945.00 Regular price €1,050.00
SAUTER SAUTER FS 4-20 force gauge with 4 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 4 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€1,035.00 Regular price €1,150.00
SAUTER SAUTER FS 4-50 force gauge with 4 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 4 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€963.00 Regular price €1,070.00
SAUTER SAUTER FS 4-100 force gauge with 4 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 4 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€1,035.00 Regular price €1,150.00
SAUTER SAUTER FS 4-200 force gauge with 4 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 4 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€1,035.00 Regular price €1,150.00
SAUTER SAUTER FS 4-500 force gauge with 4 measuring channels

Peak hold function: capturing a peak value within a measuring process..Scan mode: continuous capture and display of measurements..Push and Pull: the measuring device can capture tension and compression forces..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..USB data interface: To connect the balance to a printer, PC or other peripherals...Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning...Rechargeable battery pack: rechargeable set

  • 3.5" touch screen
  • Standard version with 4 measuring channels for external force sensors
  • An internal measuring cell possible (is deactivated if an external measuring cell is plugged into slot 1)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment is possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for programming, data transfer and power supply
  • Integrated SD card memory
  • Adjustable SI units: kg, N, kN, Nm, kNm
  • Tolerance function
  • TRACK function for continuous display of the measurement
  • Peak value measurement
€1,035.00 Regular price €1,150.00